brightness control(xorg) , Auto login DM, Bootable pendrive maker script, auto power profiling using auto-cpufreq, timeshift backup, samba-ssh server setup

tabs/common-script.sh

@@ -5,6 +5,7 @@
 RC='\033[0m'
 RED='\033[31m'
 YELLOW='\033[33m'
+CYAN='\033[36m'
 GREEN='\033[32m'
 
 command_exists() {

tabs/system-setup/5-samba-ssh-setup.sh

@@ -0,0 +1,205 @@
+#!/bin/sh -e
+
+# Load common script functions
+. ../common-script.sh  
+
+# Function to install packages based on the package manager
+install_package() {
+    PACKAGE=$1
+    if ! command_exists "$PACKAGE"; then
+        case "$PACKAGER" in
+            pacman)
+                $ESCALATION_TOOL "$PACKAGER" -S --noconfirm "$PACKAGE"
+                ;;
+            *)
+                $ESCALATION_TOOL "$PACKAGER" install -y "$PACKAGE"
+                ;;
+        esac
+    else
+        echo "$PACKAGE is already installed."
+    fi
+}       
+
+# Function to setup and configure SSH
+setup_ssh() {
+    printf "%b\n" "${YELLOW}Setting up SSH...${RC}"
+
+    # Detect package manager and install appropriate SSH package
+    case "$PACKAGER" in
+    "apt-get")
+        install_package openssh-server
+        SSH_SERVICE="ssh"
+        ;;
+    "pacman")
+        install_package openssh
+        SSH_SERVICE="sshd"
+        ;;
+    *)
+        install_package openssh-server
+        SSH_SERVICE="sshd"
+        ;;
+    esac
+
+    # Enable and start the appropriate SSH service
+    $ESCALATION_TOOL systemctl enable "$SSH_SERVICE"
+    $ESCALATION_TOOL systemctl start "$SSH_SERVICE"
+
+    # Get the local IP address
+    LOCAL_IP=$(ip -4 addr show | awk '/inet / {print $2}' | tail -n 1)
+
+    printf "%b\n" "${GREEN}Your local IP address is: $LOCAL_IP${RC}"
+
+    # Check if SSH is running
+    if systemctl is-active --quiet "$SSH_SERVICE"; then
+        printf "%b\n" "${GREEN}SSH is up and running.${RC}"
+    else
+        printf "%b\n" "${RED}Failed to start SSH.${RC}"
+    fi
+}
+
+# Function to setup and configure Samba
+setup_samba() {
+    printf "%b\n" "${YELLOW}Setting up Samba...${RC}"
+
+    # Install Samba if not installed
+    install_package samba
+
+    SAMBA_CONFIG="/etc/samba/smb.conf"
+
+    if [ -f "$SAMBA_CONFIG" ]; then
+        printf "%b\n" "${YELLOW}Samba configuration file already exists in $SAMBA_CONFIG.${RC}"
+        printf "Do you want to modify the existing Samba configuration? (yes/no): "
+        read -r MODIFY_SAMBA
+        if [ "$MODIFY_SAMBA" = "yes" ]; then
+            "$ESCALATION_TOOL" "$EDITOR" "$SAMBA_CONFIG"
+        fi
+    else
+        printf "%b\n" "${YELLOW}No existing Samba configuration found. Setting up a new one...${RC}"
+
+        # Prompt user for shared directory path
+        printf "Enter the path for the Samba share (default: /srv/samba/share): "
+        read -r SHARED_DIR
+        SHARED_DIR=${SHARED_DIR:-/srv/samba/share}
+
+        # Create the shared directory if it doesn't exist
+        $ESCALATION_TOOL mkdir -p "$SHARED_DIR"
+        $ESCALATION_TOOL chmod -R 0777 "$SHARED_DIR"
+
+        # Add a new Samba user
+        echo "Enter Samba username: "
+        read -r SAMBA_USER
+
+        # Loop until the passwords match
+        while true; do
+            echo "Enter Samba password: "
+            stty -echo
+            read -r SAMBA_PASSWORD
+            stty echo
+            echo "Confirm Samba password: "
+            stty -echo
+            read SAMBA_PASSWORD_CONFIRM
+            stty echo
+            echo ""
+            if [ "$SAMBA_PASSWORD" = "$SAMBA_PASSWORD_CONFIRM" ]; then
+                printf "%b\n" "${GREEN}Passwords match.${RC}"
+                break
+            else
+                printf "%b\n" "${RED}Passwords do not match. Please try again.${RC}"
+            fi
+        done
+
+        # Add the user and set the password
+        $ESCALATION_TOOL smbpasswd -a "$SAMBA_USER"
+
+        # Configure Samba settings
+        $ESCALATION_TOOL sh -c "cat > $SAMBA_CONFIG" <<EOL
+[global]
+   workgroup = WORKGROUP
+   server string = Samba Server
+   security = user
+   map to guest = bad user
+   dns proxy = no
+
+[Share]
+   path = $SHARED_DIR
+   browsable = yes
+   writable = yes
+   guest ok = no
+   read only = no
+EOL
+    fi
+
+    # Enable and start Samba services
+    $ESCALATION_TOOL systemctl enable smb nmb
+    $ESCALATION_TOOL systemctl start smb nmb
+
+    # Check if Samba is running
+    if systemctl is-active --quiet smb && systemctl is-active --quiet nmb; then
+        printf "%b\n" "${GREEN}Samba is up and running.${RC}"
+        printf "%b\n" "${YELLOW}Samba share available at: $SHARED_DIR${RC}"
+    else
+        printf "%b\n" "${RED}Failed to start Samba.${RC}"
+    fi
+}
+
+# Function to configure firewall (optional)
+configure_firewall() {
+    printf "%b\n" "${BLUE}Configuring firewall...${RC}"
+
+    if command_exists ufw; then
+        $ESCALATION_TOOL ufw allow OpenSSH
+        $ESCALATION_TOOL ufw allow Samba
+        $ESCALATION_TOOL ufw enable
+        printf "%b\n" "${GREEN}Firewall configured for SSH and Samba.${RC}"
+    else
+        printf "%b\n" "${YELLOW}UFW is not installed. Skipping firewall configuration.${RC}"
+    fi
+}
+
+setup_ssh_samba(){
+    printf "Samba and SSH Setup Script\n"
+    printf "----------------------------\n"
+    clear
+
+    # Display menu
+    printf "Select an option:\n"
+    printf "1. Setup SSH\n"
+    printf "2. Setup Samba\n"
+    printf "3. Configure Firewall\n"
+    printf "4. Setup All\n"
+    printf "5. Exit\n"
+
+    printf "Enter your choice [1-5]: "
+    read CHOICE
+
+    case "$CHOICE" in
+        1)
+            setup_ssh
+            ;;
+        2)
+            setup_samba
+            ;;
+        3)
+            configure_firewall
+            ;;
+        4)
+            setup_ssh
+            setup_samba
+            configure_firewall
+            ;;
+        5)
+            printf "%b\n" "${GREEN}Exiting.${RC}"
+            exit 0
+            ;;
+        *)
+            printf "%b\n" "${RED}Invalid choice. Please enter a number between 1 and 5.${RC}"
+            exit 1
+            ;;
+    esac
+
+    printf "%b\n" "${GREEN}Setup completed.${RC}"
+}
+
+checkEnv
+checkEscalationTool
+setup_ssh_samba

tabs/system-setup/tab_data.toml

@@ -52,6 +52,10 @@ script = "3-global-theme.sh"
 name = "Remove Snaps"
 script = "4-remove-snaps.sh"
 
+[[data]]
+name = "SSH-Samba Setup"
+script = "5-samba-ssh-setup.sh"
+
 [[data]]
 name = "Docker Setup"
-script = "6-docker-setup.sh"
+script = "6-docker-setup.sh"