Moes AM43 does not send opening and closing states

[AnJ-Github]

I recently bought Moes AM43-0.45/40-ES-EB cover/blind motor. I initially was using ZHA and it worked surprisingly well. But due to other sensors not working at all I had to switch to Z2M, and problems with this motor started.

It seems I lost the closing/opening states. Now, after triggering for example action of closing the cover, the state is immediately updated to “Closed”, even when in fact the cover is still closing. It worked really nice in ZHA. I was able to for example wait for the cover to close fully and then trigger other actions in automatiions. Now it is impossible, since there is no wait time, status is updated to "Closed" immediately. Is there something wrong my side, on Z2M side, or it was some magic on the HA side inside the ZHA integration itself?

Also while using Z2M it seems the motor is not recognizing the lowest position. After reaching the bottom it keeps saying it is closed for a second, and then status is updated and says it is open with 1%.

So, is there anything I can do about it?