Skip to content

commands

holiman edited this page Mar 25, 2014 · 25 revisions

help

  • help This help. Use ' help' for details of the following commands:

  • data { Plot window / data buffer manipulation... }

  • exit Exit program

  • hf { HF commands... }

  • hw { Hardware commands... }

  • lf { LF commands... }

  • quit Quit program

  • script Run script

data help

  • help This help
  • amp Amplify peaks
  • askdemod <0|1> -- Attempt to demodulate simple ASK tags
  • autocorr -- Autocorrelation over window
  • bitsamples @ Get raw samples as bitstring
  • bitstream [clock rate] -- Convert waveform into a bitstream
  • buffclear Clear sample buffer and graph window
  • dec Decimate samples
  • detectclock Detect clock rate
  • fskdemod Demodulate graph window as a HID FSK
  • grid -- overlay grid on graph window, use zero value to turn off either
  • hexsamples @ [] -- Dump big buffer as hex bytes
  • hide Hide graph window
  • hpf Remove DC offset from trace
  • load -- Load trace (to graph window
  • ltrim -- Trim samples from left of trace
  • mandemod [i] [clock rate] -- Manchester demodulate binary stream (option 'i' to invert output)
  • manmod [clock rate] -- Manchester modulate a binary stream
  • norm Normalize max/min to +/-500
  • plot Show graph window (hit 'h' in window for keystroke help)
  • samples @ [512 - 40000] -- Get raw samples for graph window
  • save -- Save trace (from graph window)
  • scale -- Set cursor display scale
  • threshold -- Maximize/minimize every value in the graph window depending on threshold
  • zerocrossings Count time between zero-crossings

hf help

  • help This help
  • 14a { ISO14443A RFIDs... }
  • 14b { ISO14443B RFIDs... }
  • 15 { ISO15693 RFIDs... }
  • epa { German Identification Card... }
  • legic @ { LEGIC RFIDs... }
  • iclass { ICLASS RFIDs... }
  • mf { MIFARE RFIDs... }
  • tune @ Continuously measure HF antenna tuning

hf 14a help

  • help This help
  • list @ List ISO 14443a history
  • reader @ Act like an ISO14443 Type A reader
  • cuids @ Collect n>0 ISO14443 Type A UIDs in one go
  • sim @ -- Fake ISO 14443a tag
  • snoop @ Eavesdrop ISO 14443 Type A
  • raw @ Send raw hex data to tag

hf 14b help

  • help This help
  • demod Demodulate ISO14443 Type B from tag
  • list @ List ISO 14443 history
  • read @ Read HF tag (ISO 14443)
  • sim @ Fake ISO 14443 tag
  • simlisten @ Get HF samples as fake tag
  • snoop @ Eavesdrop ISO 14443
  • sri512read @ Read contents of a SRI512 tag
  • srix4kread @ Read contents of a SRIX4K tag
  • raw @ Send raw hex data to tag

hf 15 help

  • help This help
  • demod Demodulate ISO15693 from tag
  • read @ Read HF tag (ISO 15693)
  • record @ Record Samples (ISO 15693)
  • reader @ Act like an ISO15693 reader
  • sim @ Fake an ISO15693 tag
  • cmd @ Send direct commands to ISO15693 tag
  • findafi @ Brute force AFI of an ISO15693 tag
  • dumpmemory @ Read all memory pages of an ISO15693 tag

hf epa help

  • help This help
  • cnonces @ Acquire n>0 encrypted PACE nonces of size m>0 with d sec pauses

hf legic help

  • help This help
  • decode @ Display deobfuscated and decoded LEGIC RF tag data (use after hf legic reader)
  • reader @ [offset [length]] -- read bytes from a LEGIC card
  • save @ [] -- Store samples
  • load @ -- Restore samples
  • sim @ [phase drift [frame drift [req/resp drift]]] Start tag simulator (use after load or read)
  • write @ -- Write sample buffer (user after load or read)
  • fill @ -- Fill/Write tag with constant value

hf iclass help

  • help This help
  • list @ List iClass history
  • snoop @ Eavesdrop iClass communication
  • sim @ Simulate iClass tag
  • reader @ Read an iClass tag

hf mf help

  • help This help
  • dbg @ Set default debug mode
  • rdbl @ Read MIFARE classic block
  • urdbl @ Read MIFARE Ultralight block
  • urdcard @ Read MIFARE Ultralight Card
  • uwrbl @ Write MIFARE Ultralight block
  • rdsc @ Read MIFARE classic sector
  • dump @ Dump MIFARE classic tag to binary file
  • restore @ Restore MIFARE classic binary file to BLANK tag
  • wrbl @ Write MIFARE classic block
  • chk @ Test block keys
  • mifare @ Read parity error messages.
  • nested @ Test nested authentication
  • sniff @ Sniff card-reader communication
  • sim @ Simulate MIFARE card
  • eclr @ Clear simulator memory block
  • eget @ Get simulator memory block
  • eset @ Set simulator memory block
  • eload @ Load from file emul dump
  • esave @ Save to file emul dump
  • ecfill @ Fill simulator memory with help of keys from simulator
  • ekeyprn @ Print keys from simulator memory
  • csetuid @ Set UID for magic Chinese card
  • csetblk @ Write block into magic Chinese card
  • cgetblk @ Read block from magic Chinese card
  • cgetsc @ Read sector from magic Chinese card
  • cload @ Load dump into magic Chinese card
  • csave @ Save dump from magic Chinese card into file or emulator

hw help

  • help This help
  • detectreader @ ['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)
  • fpgaoff @ Set FPGA off
  • lcd @ -- Send command/data to LCD
  • lcdreset @ Hardware reset LCD
  • readmem @ [address] -- Read memory at decimal address from flash
  • reset @ Reset the Proxmark3
  • setlfdivisor @ <19 - 255> -- Drive LF antenna at 12Mhz/(divisor+1)
  • setmux @ <loraw|hiraw|lopkd|hipkd> -- Set the ADC mux to a specific value
  • tune @ Measure antenna tuning
  • version @ Show version inforation about the connected Proxmark

lf help

  • help This help
  • cmdread @ <'0' period> <'1' period> ['h'] -- Modulate LF reader field to send command before read (all periods in microseconds) (option 'h' for 134)
  • em4x { EM4X RFIDs... }
  • flexdemod Demodulate samples for FlexPass
  • hid { HID RFIDs... }
  • io { ioProx tags... }
  • indalademod ['224'] -- Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)
  • indalaclone ['l']-- Clone Indala to T55x7 (tag must be in antenna)(UID in HEX)(option 'l' for 224 UID
  • read @ ['h'|] -- Read 125/134 kHz LF ID-only tag (option 'h' for 134, alternatively: f=12MHz/(divisor+1))
  • sim @ [GAP] -- Simulate LF tag from buffer with optional GAP (in microseconds)
  • simbidir @ Simulate LF tag (with bidirectional data transmission between reader and tag)
  • simman @ [GAP] Simulate arbitrary Manchester LF tag
  • ti { TI RFIDs... }
  • hitag { Hitag tags and transponders... }
  • vchdemod ['clone'] -- Demodulate samples for VeriChip
  • t55xx { T55xx RFIDs... }
  • pcf7931 {PCF7931 RFIDs...}

lf em4x help

  • help This help
  • em410xread [clock rate] -- Extract ID from EM410x tag
  • em410xsim @ -- Simulate EM410x tag
  • em410xwatch @ ['h'] -- Watches for EM410x 125/134 kHz tags (option 'h' for 134)
  • em410xwrite <'0' T5555> <'1' T55x7> [clock rate] -- Write EM410x UID to T5555(Q5) or T55x7 tag, optionally setting clock rate
  • em4x50read Extract data from EM4x50 tag
  • readword -- Read EM4xxx word data
  • readwordPWD -- Read EM4xxx word data in password mode
  • writeword -- Write EM4xxx word data
  • writewordPWD -- Write EM4xxx word data in password mode

lf hid help

  • help This help
  • demod Demodulate HID Prox Card II (not optimal)
  • fskdemod Realtime HID FSK demodulator
  • sim -- HID tag simulator
  • clone ['l'] -- Clone HID to T55x7 (tag must be in antenna)(option 'l' for 84bit ID)

lf ti help

  • help This help
  • demod Demodulate raw bits for TI-type LF tag
  • read @ Read and decode a TI 134 kHz tag
  • write @ Write new data to a r/w TI 134 kHz tag

lf hitag help

  • help This help
  • list List Hitag trace history
  • reader Act like a Hitag Reader
  • sim Simulate Hitag transponder
  • snoop Eavesdrop Hitag communication

lf pcf7931 help

  • help This help
  • read Read content of a PCF7931 transponder

lf t55xx help

  • help This help
  • readblock -- Read T55xx block data (page 0)
  • readblockPWD -- Read T55xx block data in password mode(page 0)
  • writeblock -- Write T55xx block data (page 0)
  • writeblockPWD -- Write T55xx block data in password mode(page 0)
  • readtrace Read T55xx traceability data (page 1)
Clone this wiki locally