CY8CKIT 062S2 AI Radar Fusion GUI

Enables to use the CY8CKIT-062S2-AI dev board with Infineon Radar Fusion GUI.

Requirements

• ModusToolbox® software v2025.4.0 [tested with v3.3]
• Radar Fusion GUI [tested with v3.6.5]
• CY8CKIT-062S2-AI Infineon Development Kit

Supported toolchains (make variable 'TOOLCHAIN')

• GNU Arm® Embedded Compiler v11.3.1 (GCC_ARM) - Default value of TOOLCHAIN

Using the code example

• In Eclipse IDE for ModusToolbox click on File -> New -> ModusToolbox™ Application
• Select the CY8CKIT-062S2-AI in the list and click "Next >"
• In the "Sensing" category, select the CY8CKIT-062S2-AI Radar Fusion GUI application and click "Create".

This will create a project inside Modus Toolbox and download all the necessary resources.

Build the project by clicking on "Build Project" in the "Quick Panel".

Use USB-C cable to connect your laptop to the KP3_USB port of the CY8CKIT-062S2-AI.

Program the CY8CKIT-062S2-AI kit by clicking on "Program" in the "Quick Panel".

Use USB-C cable to connect your laptop to the P6_USB port of the CY8CKIT-062S2-AI.

Start the Radar Fusion GUI software. It should auto-detect the board.

Click on the BGT60TR13C icon. You should now see:

Legal Disclaimer

The evaluation board including the software is for testing purposes only and, because it has limited functions and limited resilience, is not suitable for permanent use under real conditions. If the evaluation board is nevertheless used under real conditions, this is done at one’s responsibility; any liability of Rutronik is insofar excluded.