-
Notifications
You must be signed in to change notification settings - Fork 5
Teensy Shields and Breakout Boards
-
- Revision C board is for Teensy 3.1, 3.2, 3.5, or 3.6;
-
- Revision D board is for Teensy 4.0.
-
Adafruit: Teensy -> Feather Adapter (includes LIPO charger)
-
Hyperbolic Labs: Nano-sized LiPo Charger for Teensy (Out of stock since October 2019)
-
Burgess World: Arduino shield for Teensy 4.0, ESP8266 wifi, bluetooth
-
Burgess World: Arduino shield for Teensy 3.2, ESP8266 wifi, bluetooth
-
HighCee Aerial Robotics: JST GH-1.25-4P connectors for I2C0, I2C1, CAN0, CAN1, SER2 and SER5
-
Raster: Break out Teensy 3.2/4.0 v1.6 to use screw terminals, 7 ground pins in back row, 6 3.3v pins
-
Knick Knack Sound: Phin6 MIDI Controller (powered by Teensy)
-
Adafruit: Teensy -> Feather Adapter (includes LIPO charger)
-
Adafruit: Power relays
-
Adafruit Prototype boards
-
Adafruit: Displays
-
Adafruit: Motors
-
Adafruit: Communication
-
Adafruit: Miscellaneous
- Loglows Teensy Tindie page
- OSH park PCB to access Teensy 3.2 bottom pads from FrankB
- OSH park PCB to access Teensy 3.5/3.6 bottom pads from W7PUA
- pcbs.io PCB to convert Teensy 3.5/3.6 pinout to Teensy 3.2 from FrankB
- PJRC has this list: breakout-board-for-teensy-4-0
- Hyperbolic Labs: Teensy 4.0 Ultimate Breakout Board -- sold out since October 2019
- Loglow thread for his forthcoming Teensy 4.0 shield
- SD-Connector for Teensy 4
Teensy is a PJRC trademark. Notes here are for reference and will typically refer to the ARM variants unless noted.