Teensy Shields and Breakout Boards

Teensy Shields and Breakout Boards

Teensy Shields

• Teensy prop shield with motion sensor
• Teensy low cost prop shield, no motion sensor
• Teensy audio adapter
• Burgess World tindie.com store for Arduino shield for Teensy 4.0, ESP8266 wifi, bluetooth
• Burgess World tindie.com store for Arduino shield for Teensy 3.2, ESP8266 wifi, bluetooth
• HighCee Aerial Robotics, JST GH-1.25-4P connectors for I2C0, I2C1, CAN0, CAN1, SER2 and SER5
• Break out Teensy 3.2/4.0 to use screw terminals
• Phin6 MIDI Controller (powered by Teensy)

Breakout boards to adapt Teensy to other systems

• Adafruit Teensy -> Feather Adapter
• Sparkfun Teensy -> Arduino shield

Teensy 3.X to access the bottom solder pads

• Loglows Teensy Tindie page
• OSH park PCB to access Teensy 3.2 bottom pads from FrankB
• OSH park PCB to access Teensy 3.5/3.6 bottom pads from W7PUA
• pcbs.io PCB to convert Teensy 3.5/3.6 pinout to Teensy 3.2 from FrankB

Teensy 4.0 to access the bottom solder pads

• PJRC has this list: breakout-board-for-teensy-4-0
• Hyperbolic Labs tindie.com store for Teensy 4.0 Ultimate Breakout Board -- sold out since October 2019
• Loglow thread for his forthcoming Teensy 4.0 shield

Trainer4edu/FRDM Teensy 4.0 boards:

• Trainer4edu/FRDM Information
• OSH park PCB without USB host
• OSH park PCB with USB host
• PJRC Thread discussing the Trainer4edu/FRDM

Blackketter Teensy 4.0 boards:

• PJRC thread about the Blackketter board
• Blackketter information
• OSH park PCB for Blackketter board