Connection problem F04

[denissonwenergy]

I saw your project on github: https://github.com/aldas/modbus-tcp-client.

I have a park with the following configuration: Teltonikas Gateways and energy meters connected via RS485.

I tried to use FC4 to connect to the IP+Port of the remote gateway (teltonika) and I get the connection refused error.

Unable to create client socket to tcp://177.xx.xxx.xxx:4000: Connection refused #0 /var/www/duodigit/energy/vendor/aldas/modbus-tcp-client/src/Network/BinaryStreamConnectionBuilder.php(33): ModbusTcpClient\Network\InternetDomainStreamCreator->createStream() #1 /var/www/duodigit/energy/ vendor/aldas/modbus-tcp-client/src/Network/BinaryStreamConnection.php(42): ModbusTcpClient\Network\BinaryStreamConnectionBuilder->ModbusTcpClient\Network{closure}() #2 /var/www/duodigit/energy/overip.php(137): ModbusTcpClient\Network\BinaryStreamConnection->connect() #3 /var/www/duodigit/energy/overip.php(40): getRegister() #4 /var/www/duodigit/energy/vendor/evenement/evenement/src/EventEmitterTrait.php(143): {closure}() #5 /var/www/duodigit/energy/vendor/react/socket/src/Socket Server.php(76): Evenement\EventEmitter->emit() #6 /var/www/duodigit/energy/vendor/evenement/evenement/src/EventEmitterTrait.php(143): React\Socket\SocketServer->React\Socket{closure}() #7 /var/www/duodigit/energy/vendor/react/socket/src/TcpServer.php(258): Evenement\EventEmitter->emit() #8 /var/www/duodigit/energy/vendor/react/socket/src/TcpServer.php(239): React\Socket\TcpServer->handleConnection() #9 /var/www/duodigit/energy/vendor/re act/event-loop/src/StreamSelectLoop.php(246): React\Socket\TcpServer->React\Socket{closure}() #10 /var/www/duodigit/energy/vendor/react/event-loop/src/StreamSelectLoop.php(213): React\EventLoop\StreamSelectLoop->waitForStreamActivity() #11 /var/www/duodigit/energy/overip.php(119): React\EventLoop\StreamSelectLoop->run()
#12 {main}

I would be very grateful for your help.

• Environment:

• OS: [e.g. Ubuntu20.10/...]
• PHP version > 8

[aldas]

Connection refused implies that Server is not accepting connections. This is probably due to the firewall.

Teltonika guide says

To test the configuration, we could try to change some values in the Modbus PLC simulator and then try to read them via Modbus Master application. You might need to disable Firewall in both PC1 and PC2, or modify Firewall rules to allow both applications through the Firewall.

https://wiki.teltonika-networks.com/view/Data_transfer_from_Modbus_TCP_to_Modbus_RTU_Gateway#Testing_the_configuration

Firewall configuration guide is here https://wiki.teltonika-networks.com/view/Firewall_traffic_rules

also there is that section

In IP filter options on the bottom of the page, add IP addresses that will be allowed to reach your Modbus gateway (input 0.0.0.0/0 to allow any IP address).

so you might need to allow your IP there

[denissonwenergy]

Good morning, I am using a feature on the Teltonika TR145 called "Over IP", that is, my application acts as a server, and the gateway connects to it and after that, I need to request the data (which I imagine is via Modbus). Have you had any experience with this type of setup? Thank you for your time and support.

--- Em 02/11/2024 13:54, Martti T. escreveu:

Connection refused implies that Server is not accepting connections. This is probably due to the firewall. Teltonika guide says > To test the configuration, we could try to change some values in the Modbus PLC simulator and then try to read them via Modbus Master application. You might need to disable Firewall in both PC1 and PC2, or modify Firewall rules to allow both applications through the Firewall. https://wiki.teltonika-networks.com/view/Data_transfer_from_Modbus_TCP_to_Modbus_RTU_Gateway#Testing_the_configuration Firewall configuration guide is here https://wiki.teltonika-networks.com/view/Firewall_traffic_rules also there is that section > In IP filter options on the bottom of the page, add IP addresses that will be allowed to reach your Modbus gateway (input 0.0.0.0/0 to allow any IP address). so you might need to allow your IP there -- Reply to this email directly, view it on GitHub [1], or unsubscribe [2]. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

Links: ------ [1] #164 (comment) [2] https://github.com/notifications/unsubscribe-auth/BABN5AYGOJ5BQRKI72MWASDZ6T7TZAVCNFSM6AAAAABRBBME5GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGA2DMOBQGA

[aldas]

I have one Teltonika RUT956 at my desk at work and have tried in locally Modbus (mostly through their modbus->mqtt thingie). I assume all their OSes are the same. I can check modbus server + connecting to it from local network tomorrow when I am at the office.

[denissonwenergy]

Good morning, I'm trying to use the feature: Services -> OverIP, leaving Teltnika as *client*, but I haven't been successful in using the feature yet. My application, socket server, receives the connection from the device, so I have the IP and Port. I try to make the connection from the data I receive, but I'm not successful, even though the firewall rules are enabled. I've already tested the feature: Data to Server, from Teltnika, and I'm successful in that, but the data consumption is very high, ending my mobile data allowance from the M2M chip. Em 03/11/2024 11:25, Martti T. escreveu:

I have one Teltonika RUT956 at my desk at work and have tried in locally Modbus (mostly through their modbus->mqtt thingie) -- Reply to this email directly, view it on GitHub [1], or unsubscribe [2]. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

Links: ------ [1] #164 (comment) [2] https://github.com/notifications/unsubscribe-auth/BABN5A6OXSUVUBDOKYIDOFTZ6YW7JAVCNFSM6AAAAABRBBME5GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGQ2DMNRVGE

[aldas]

Could you help me little bit to understand your setup.

You have

1. energy meters that are connected to Teltonika routers over RS485
2. Teltonika routers at the "edge"
3. Server at the "internet"

You have tried https://wiki.teltonika-networks.com/view/RUT200_Data_to_Server but this is not succient

You are now trying to use this library - by connecting periodically from 3. (from Server) to 2. (Teltonika) and your request end up in Connection refused?

Do you use https://wiki.teltonika-networks.com/view/RUT200_Modbus to expose your RS485 device as TCP port?

[denissonwenergy]

Good morning, Exactly. I have energy meters connected to Teltonika routers; I am using the option (in Teltonika): Services -> Over IP (via TCP), in client mode, to connect to my remote server because another software vendor was already using the same feature. https://wiki.teltonika-networks.com/view/Serial_OverIP_communication_between_Server_and_Client It seems to me that, in the current configuration, the Teltonika routers, which have the current configuration, connect to my server application (and I can check the IPs that are arriving). My question is: How do I connect to the Teltonika routers and request the data (from the registers) after receiving this connection? Is it via Modbus or is there another way? I am attaching a printout of my configuration.

--- Em 03/11/2024 11:44, Martti T. escreveu:

Could you help me little bit to understand your setup. You have * energy meters that are connected to Teltonika routers over RS485 * Teltonika routers at the "edge" * Server at the "internet" You have tried https://wiki.teltonika-networks.com/view/RUT200_Data_to_Server but this is not succient You are now trying to use this library - by connecting periodically from 3. (from Server) to 2. (Teltonika) and your request end up in Connection refused? Do you use https://wiki.teltonika-networks.com/view/RUT200_Modbus to expose your RS485 device as TCP port? -- Reply to this email directly, view it on GitHub [1], or unsubscribe [2]. You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

Links: ------ [1] #164 (comment) [2] https://github.com/notifications/unsubscribe-auth/BABN5A52XM2KMHBMSAP33KDZ6YZGFAVCNFSM6AAAAABRBBME5GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGQ2TENRTHE