Create Azure Resource Group using PowerShell

This Script was created to install Resource group including storage account, virtual network & storage content . The belowscript is for installing Azure Resource group.

 

PowerShell Edit|Remove powershell ########################################################################################################## <# .SYNOPSIS Create Lab resource group, storage account, virtual network and VMs

.DESCRIPTION This script will create the following components - Resource group: it will contain all VMs, storage account, virtual network and other resources required for the lab. - you can edit on labPrefix, labnumber, labsubnet & Ip address with name as you want

.NOTES THIS CODE-SAMPLE IS PROVIDED 'AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.

#> ########################################################################################################## ###############Install Azure Module######################### Install-Module -Name AzureRM -force Import-Module -Name AzureRM Install-Module -Name AzureRM.compute Import-Module -Name AzureRM.compute

Connect to Azure

Login-AzurermAccount

Select Azure Subscription

$sub = Get-AzureRMsubscription Select-AzureRmSubscription -SubscriptionId $sub[0].SubscriptionId

Set values for new resource group, storage account and vnet

$labPrefix = 'Mlab' $labnumber = '2017' $labsubnet = '55' $rgName = $labPrefix + $labnumber #New resource group name $locName = 'West Europe' # Loation of new resource group $saName = $rgName.Replace('-','').tolower() # Storage account name (for new resource group) $saType='Standard_LRS' # Storage account type $vnetname = $rgName # New virtual network name $subnetIndex=0 # Frontend subnet ID $frontendsubnetname = $rgName + '-FE' # Frontend subnet name $backendsubnetname = $rgName + '-BE' # Backtend subnet name $vnetsubnet = '10.$labsubnet.0.0/16' # Virtual network suffix $frontendsubnetrange = '10.$labsubnet.1.0/24' # Frontend subnet range $backendsubnetrange = '10.$labsubnet.2.0/24' # Backtend subnet name $NSGName = $rgName + '-NSG'

Create initial resources

create resource group

New-AzureRmResourceGroup -Name $rgName -Location $locName | Out-Null write-output '1/14 - the resource group has been created successfully'

create storage account

New-AzureRmStorageAccount -Name $saName -ResourceGroupName $rgName –Type $saType -Location $locName | Out-Null write-output '2/14 - the storage account has been created successfully'

get storage account key

$key1 = (Get-AzureRmStorageAccountKey -Name $saName -ResourceGroupName $rgName).Value[0]

create storage context

$storagecontext = New-AzureStorageContext -StorageAccountName $saname -StorageAccountKey $key1

create a container called scripts

New-AzureStorageContainer -Name 'scripts' -Context $storagecontext -Permission BLOB | Out-Null write-output '3/14 - Scripts Container has been created successfully' New-AzureStorageContainer -Name 'baseimage' -Context $storagecontext -Permission BLOB | Out-Null write-output '4/14 - Base Image Container has been created successfully'

########################################################## Virtual network config ##############################################################

$frontendSubnet=New-AzureRmVirtualNetworkSubnetConfig -Name $frontendsubnetname -AddressPrefix $frontendsubnetrange $backendSubnet=New-AzureRmVirtualNetworkSubnetConfig -Name $backendsubnetname -AddressPrefix $backendsubnetrange $vnet = New-AzureRmVirtualNetwork -Name $vnetname -ResourceGroupName $rgName -Location $locName -AddressPrefix $vnetsubnet -Subnet $frontendSubnet,$backendsubnet -DnsServer $staticIP1,8.8.8.8 $rule1 = New-AzureRmNetworkSecurityRuleConfig -Name rdp-rule -Description 'Allow RDP' -Access Allow -Protocol Tcp -Direction Inbound -Priority 100 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 3389 $rule2 = New-AzureRmNetworkSecurityRuleConfig -Name remoteps-rule -Description 'Allow remote powershell' -Access Allow -Protocol Tcp -Direction Inbound -Priority 101 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 5986 $rule3 = New-AzureRmNetworkSecurityRuleConfig -Name winrm-rule -Description 'Allow winrm' -Access Allow -Protocol Tcp -Direction Inbound -Priority 102 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 5985 $rule4 = New-AzureRmNetworkSecurityRuleConfig -Name SMTP-rule -Description 'SMTP' -Access Allow -Protocol Tcp -Direction Inbound -Priority 103 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 25 $rule5 = New-AzureRmNetworkSecurityRuleConfig -Name HTTP-rule -Description 'HTTP' -Access Allow -Protocol Tcp -Direction Inbound -Priority 104 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 80 $rule6 = New-AzureRmNetworkSecurityRuleConfig -Name HTTPS-rule -Description 'HTTPS' -Access Allow -Protocol Tcp -Direction Inbound -Priority 105 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 443 $nsg = New-AzureRmNetworkSecurityGroup -ResourceGroupName $rgName -Location $locName -Name $NSGName -SecurityRules $rule1,$rule2,$rule3,$rule4,$rule5,$rule6 Set-AzureRmVirtualNetworkSubnetConfig -VirtualNetwork $vnet -Name $frontendsubnetname -AddressPrefix $frontendsubnetrange -NetworkSecurityGroup $nsg | Out-Null Set-AzureRmVirtualNetwork -VirtualNetwork $vnet | Out-Null $vnet = Get-AzureRMVirtualNetwork -Name $vnetName -ResourceGroupName $rgName write-output '8/14 - Virtual netwrok has been created successfully with two subnets frontend & backend. Also NSG has been created successfully'

##########################################################################################################  <#  .SYNOPSIS      Create Lab resource group, storage account, virtual network and VMs        .DESCRIPTION      This script will create the following components      -    Resource group: it will contain all VMs, storage account, virtual network and other resources required for the lab.      -    you can edit on labPrefix, labnumber, labsubnet & Ip address with name as you want    .NOTES      THIS CODE-SAMPLE IS PROVIDED 'AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED       OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR       FITNESS FOR A PARTICULAR PURPOSE.      #>  ##########################################################################################################  ###############Install Azure Module#########################  Install-Module -Name AzureRM -force  Import-Module -Name AzureRM  Install-Module -Name AzureRM.compute  Import-Module -Name AzureRM.compute    # Connect to Azure    Login-AzurermAccount    # Select Azure Subscription  $sub = Get-AzureRMsubscription  Select-AzureRmSubscription -SubscriptionId $sub[0].SubscriptionId    # Set values for new resource group, storage account and vnet  $labPrefix = 'Mlab'  $labnumber = '2017'  $labsubnet = '55'  $rgName = $labPrefix + $labnumber #New resource group name  $locName = 'West Europe' # Loation of new resource group  $saName = $rgName.Replace('-','').tolower() # Storage account name (for new resource group)  $saType='Standard_LRS' # Storage account type  $vnetname = $rgName # New virtual network name  $subnetIndex=0 # Frontend subnet ID  $frontendsubnetname = $rgName + '-FE' # Frontend subnet name  $backendsubnetname = $rgName + '-BE' # Backtend subnet name  $vnetsubnet = '10.$labsubnet.0.0/16' # Virtual network suffix  $frontendsubnetrange = '10.$labsubnet.1.0/24' # Frontend subnet range  $backendsubnetrange = '10.$labsubnet.2.0/24' # Backtend subnet name  $NSGName = $rgName + '-NSG'    ## Create initial resources  # create resource group  New-AzureRmResourceGroup -Name $rgName -Location $locName | Out-Null  write-output '1/14 - the resource group has been created successfully'  # create storage account  New-AzureRmStorageAccount -Name $saName -ResourceGroupName $rgName –Type $saType -Location $locName | Out-Null  write-output '2/14 - the storage account has been created successfully'  # get storage account key  $key1 = (Get-AzureRmStorageAccountKey -Name $saName -ResourceGroupName $rgName).Value[0]  # create storage context  $storagecontext = New-AzureStorageContext -StorageAccountName $saname -StorageAccountKey $key1  # create a container called scripts  New-AzureStorageContainer -Name 'scripts' -Context $storagecontext -Permission BLOB  | Out-Null  write-output '3/14 - Scripts Container has been created successfully'  New-AzureStorageContainer -Name 'baseimage' -Context $storagecontext -Permission BLOB | Out-Null  write-output '4/14 - Base Image Container has been created successfully'      ########################################################## Virtual network config ##############################################################    $frontendSubnet=New-AzureRmVirtualNetworkSubnetConfig -Name $frontendsubnetname -AddressPrefix $frontendsubnetrange  $backendSubnet=New-AzureRmVirtualNetworkSubnetConfig -Name $backendsubnetname -AddressPrefix $backendsubnetrange  $vnet = New-AzureRmVirtualNetwork -Name $vnetname -ResourceGroupName $rgName -Location $locName -AddressPrefix $vnetsubnet -Subnet $frontendSubnet,$backendsubnet -DnsServer $staticIP1,8.8.8.8  $rule1 = New-AzureRmNetworkSecurityRuleConfig -Name rdp-rule -Description 'Allow RDP' -Access Allow -Protocol Tcp -Direction Inbound -Priority 100 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 3389  $rule2 = New-AzureRmNetworkSecurityRuleConfig -Name remoteps-rule -Description 'Allow remote powershell' -Access Allow -Protocol Tcp -Direction Inbound -Priority 101 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 5986  $rule3 = New-AzureRmNetworkSecurityRuleConfig -Name winrm-rule -Description 'Allow winrm' -Access Allow -Protocol Tcp -Direction Inbound -Priority 102 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 5985  $rule4 = New-AzureRmNetworkSecurityRuleConfig -Name SMTP-rule -Description 'SMTP' -Access Allow -Protocol Tcp -Direction Inbound -Priority 103 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 25  $rule5 = New-AzureRmNetworkSecurityRuleConfig -Name HTTP-rule -Description 'HTTP' -Access Allow -Protocol Tcp -Direction Inbound -Priority 104 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 80  $rule6 = New-AzureRmNetworkSecurityRuleConfig -Name HTTPS-rule -Description 'HTTPS' -Access Allow -Protocol Tcp -Direction Inbound -Priority 105 -SourceAddressPrefix Internet -SourcePortRange * -DestinationAddressPrefix * -DestinationPortRange 443  $nsg = New-AzureRmNetworkSecurityGroup -ResourceGroupName $rgName -Location $locName -Name $NSGName -SecurityRules $rule1,$rule2,$rule3,$rule4,$rule5,$rule6  Set-AzureRmVirtualNetworkSubnetConfig -VirtualNetwork $vnet -Name $frontendsubnetname -AddressPrefix $frontendsubnetrange -NetworkSecurityGroup $nsg | Out-Null  Set-AzureRmVirtualNetwork -VirtualNetwork $vnet | Out-Null  $vnet = Get-AzureRMVirtualNetwork -Name $vnetName -ResourceGroupName $rgName  write-output '8/14 - Virtual netwrok has been created successfully with two subnets frontend & backend. Also NSG has been created successfully'

 

You can use this script in following steps:    

• Download the script and copy it to your Server or Client machine.

• Run Windows PowerShell as Administrator

• .\CreateResourceGroup.ps1. Note:

• You will need to install Azure PowerShell before running this script.

• You can edit on labPrefix, labnumber, labsubnet & Ip address with name as you want

TechNet gallery is retiring! This script was migrated from TechNet script center to GitHub by Microsoft Azure Automation product group. All the Script Center fields like Rating, RatingCount and DownloadCount have been carried over to Github as-is for the migrated scripts only. Note : The Script Center fields will not be applicable for the new repositories created in Github & hence those fields will not show up for new Github repositories.