Silabs multiprotocol for HA docker installation

This container is a standalone version of the Silicon Labs multiprotocol addon for HAOS. without the HAOS stuff.

Warning

This project is deprecated due to discontinued multiprotocol support for Home Assistant SkyConnect (ZBT-1).

See https://www.home-assistant.io/connectzbt1

❗ Attention ❗

I do not provide any support for the software running in this container.

I have only provided a standalone version of the Silabs multiprotocol container which can run without HAOS

Credits

Based on the work by @nervousapps and m33ts4k0z

Versions

see VERSIONS.md

Changelog

see CHANGELOG.md

Docs

see DOCS.md

Base

see BASE.md

❗ requirements ❗ read carefully ❗

1. the container must run in host network mode
2. working IPv6 in your LAN
3. the container must run with --privileged flag
4. the name of your network interface (try ifconfig or ip a) to set BACKBONE_IF correctly
5. the path of your Device like /dev/tty??? (/dev/serial/by-id/ will not work out of the box)
6. Zigbee channel and Thread channel must be configured to the same
7. Port 8081 is not in use because the OTBR API use is (can't be changed)

environment variables

take a look at the Dockerfile file for more information

getting started

⚠️ change DEVICE and BACKBONE_IF to your environment ⚠️

as docker run

docker run --name multipan \
            --detach \
            --privileged \
            --network host \
            --restart unless-stopped \
            --volume ~/multipan/:/data \
            --env DEVICE="/dev/ttyUSB0" \
            --env BACKBONE_IF="eth0" \
            b2un0/silabs-multipan-docker:latest

as docker compose

1. download the docker-compose.yml or copy the service to your existing one
2. change the config in environment if necessary
3. run docker compose up -d

Setup OpenThread Border Router

open in your browser http://HOST:8086 and configure your OTBR

Home Assistant

OTBR

add a new Device Integration Open Thread Border Router and use as Host http://HOST:8081 as Endpoint.

ZHA

1. Add the Zigbee Home Automation (ZHA) integration
2. Choose EZSP as Radio type
3. As serial path, enter tcp://host_ip:20108 or socket://host_ip:20108
4. Port speed 460800
5. flow control hardware

Setup Zigbee2MQTT

To use this with Zigbee2MQTT change the configuration.yaml file of Zigbee2MQTT to this configuration:

serial:
  port: tcp://host_ip:20108
  adapter: ezsp
  baudrate: 460800

Restart Zigbee2MQTT. It might take a couple of tries for Zigbee2MQTT to connect the first time, but it will work without issues afterward.

Matter

you also need the python-matter-server if you want to use Matter enabled devices with Home Assistant.

Firmware Update

1. download the newer firmware from https://github.com/NabuCasa/silabs-firmware/tree/main/RCPMultiPAN/beta
2. place them into your local directory ~/multipan/firmware/ (if your /data Volume mounted to ~/multipan/)
3. change the environment variable FIRMWARE to the new Filename (without path)
4. change the environment variable AUTOFLASH_FIRMWARE to 1
5. redeploy your container

Docker Base Images

arch	url
aarch64	https://hub.docker.com/r/homeassistant/aarch64-addon-silabs-multiprotocol
amd64	https://hub.docker.com/r/homeassistant/amd64-addon-silabs-multiprotocol
armv7	https://hub.docker.com/r/homeassistant/arm-addon-silabs-multiprotocol
i386	not exists (not supported by HA)