3. Functions en US

Brief introduction

Trapdoor给生电玩家提供了十分丰富的功能，且几乎所有功能都通过指令来提供。为了达到最佳的使用效果，请在本地(客户端，不是服务端)加载最新版Trapdoor CUI材质包。 下面是每个功能的介绍

Description

For all commands below,

• []means filling in parameter
• [int]means filling in integers, such as -1,1,0,12,128
• [bool]means filling bool, such as true(1) orfalse(0)
• [str]means filling words or symbols

Moreover, for all commands, you can use ? to seek help, for example:

tick ?

will show all tick commands and their description

Command list

td?

It shows all commands that you are enabled to use, if it did not show some commands, there is a possibility of command being switched off by the owner or your operation level is not high enough.

apicfg

It is for adjusting the setting of the api of plugin, two options available.

• apicfg pvd [int] adjust the visible distance of the particles including village boundary, chunk visualize, etc.
• apicfg pm [bool] reducing the lag cause by the particles which also reduce the quality of particles

tick

sub-commands

• tick fz stop world ticking
• tick slow [int] slow down ticking speed to 1gt = 50 * num ms,numis between[2,64]
• tick acc [int] accelerate ticking speed to1gt = 50/num ms, actual effect depends on how good your server is , which num lies between [2,10]
• tick fw [int] tick forward num gt, which skips thenumof gt. If the num is too large, it needs to load for a longer time.
• tick r reset the tick speed back to normal game tick speed
• tick q ask for the ticking speed status

Description

1. After running a large amount oftickrelated command, there is a possibility of players unable to join in the server as time in game is not equal. This problem is unable to be fixed unless you restart the server
2. While using thetick acc, prevent having a very large value. Using prof command to check mstp and calculate 50/mstp as the [int]

mspt

Shows the mstp and TPS in game, reminded that only 1 gametick is considered and as tasks done in redstone tick is much more than non-redstone tick, it is normal that the mstp is fluctuating. If the value is very large, it means that redstone tick is detected and vice versa. If you want a more reliable value, using prof is recommended or simply take average of the mstp value

At new version of mstp when the symbol # is in red, it means it is at redstone tick and white means non-redstone tick

prof

• prof calculate and display the average value of100gt, so it will be taking 5s for a result. This would be outputted as result:

mstp & TPS

time of redstone system being updated, chunks loaded and time of entities being updated

amount of chunks being loaded and the total time

the random tick of chunks being updated, time required for block update and pending tick update

• prof actor calculate and display the detailed calculation time for all entities while the game is running, which can also be used to display all entities in ticking area. If the entities shows zero, it means that it is despawned during the calculation. An average in 100gt will be calculated and displayed with the following format:

entity name, english display, total update time (total amount of entities in loaded chunks )

func

It is for switching on or off specific function for all players and server

• func rotate [bool] on or off cactus rotating function, default off
• func hopper [bool] on or off hopper counter, default off
• func spawn [bool] on or off mob spawning rates, default off
• func stat [bool] on or off player action record, only support mining ranks and block-placing record (currently removed considering the presentation sqlite)
• func expl [bool] on or off explosion damage (affecting entities but not landscape while on)
• func ncud [bool] on or off NC update

village

It is for village related commands

• village list lists all ticking village, update once per 1s
• village b [bool] on or off visualizing village boundary, red at default
• village c [bool] on or off visualizing village center, heart particle as default
• village s [bool] on or off visualizing iron golem spawning area (if inaccurate area is displayed, please contact developer), red at default
• village p [bool] on or off displaying POI requesting boundary, red at default
• village v [bool] on or off village info display, B M J will be displayed above villagers' head which represent Bed, Bell and Job respectively which red represent non-linked and green represent linked. Attacking the villager will show the village center and POI linked while attacking iron golem can show the village center which the iron golem is in. When this function is enabled, it will not do any damage to villager and iron golem while attacking it.
• village nlists all detail information of the nearest village including all POI and the linking relationship

Color of the boundary display and the particle for village center display can be set in the trapdoor-config

hsa

• hsa show [bool]shows the hsa at specific structures, which red represents fortress, green for witch hut, blue for ocean monument and yellow for pillager outpost (due to bugs of render dragon, hsa in fortress are unable to display at version 1.16.201 or above)
• hsa draw [bool] place block under hsa
• hsa clear clear hsa data and print amount of cleared hsa data

slime

• slime show [bool] on or off slime chunk display, updated each 5s
• slime cclear and re-calculate the slime chunk saved
• slime r [int] set the radius of slime chunk display being visualize with radius: r

spanwcounter

Function removed as potential risk of corruption

This command support mob spawning analysing supports

• spawncounter s start counting mob spawning
• spawncounter e stop counting mob spawning
• spawncounter pprint result

o,s,c

An extension of gamemode command

• o switch to spectator mode
• s switch to survival mode
• c switch to creative mode

OS

Display server information,

CPU : 12%
Mem: 170MB VMem 171MB
Read/Write: 1203/1234 KB

self

Display player's personal information which will not affect other players

• selfdisplay chunk location, direction facing and dimension
• self chunk [bool]display chunk border where the player is located
• self me [bool] on or off measuring function
• self rs [bool] on or off signal source displaying

backup

This is backup-related function, which needs to fill in folder name before using

• backup bbackup the world
• backup llist all backups
• backup crashcrash server

All world files are not compressed and moved into the trapdoor-backup folder

draw

Have to enable func draw true before using

This command has increased the possibility of fill command and enable drawing circle and sphere

All filling block will be the block below the player

• draw ci [int]fill a circle with radius of abs(num) while (num)>0 it will filled with solid blocks, (num)<0 will be filling with air
• draw sp [int]fill a sphere which using basically the same system mentioned above

This command is not working if player is standing on block which height 1.5 (blame hhhxiao, he is not planning to fix kekw)

counter

Have to enablefunc hopper truebefore using

Hopper counter is for counting the amount of item collected

After using /func hopper true, if the hopper is not aiming at any color of concrete but not chests, the hopper will become infinite hopper which all items absorbed into hopper with not enter any slot of the hopper but data will be recorded. By using counter p channel, you can check the data of item collected by hopper, amount of item and the rate of item entering the hopper. Using /counter reset [channel] can reset hopper data of all channels which [channel] is [0-15]. Once if you are not sure about which channel do the color represents, you can right click with a cactus to show specific channels.

fakeplayer

Experimental function, please download code to rewrite

trapdoor is not providing or including fake player software interacting function. After activating the websocket of fake player,players are able to control fake player in game

• fakeplayer conn [str]connect with fake player software, which str is the link of websocket, such as ws://127.0.0.1:1234
• fakeplayer add [str] adding fake player to spawn
• fakeplayer remove [str]removing fake player
• fakeplayer list [str] list all fake player
• fakeplayer tp [str] teleport fake player to where the player located

Functions

The following is some of non-command function

Cactus rotating function

Can be used after enabling func rotate true. Right clicking the block can rotate specific blocks such as all slabs, stairs and redstone components

Chunk visualizing

Need to enable self chunk true before using

Enabling it can display the chunk boarder which green grid represents slime chunks and white grid represents normal chunks(major purpose is to replace the chunk boarder pack outdated since 1.16.200)

Mob spawning function

Need to enablefunc spawn true before using

• right click on blocks with bones can show the process spawning spot choosing of the Y axis
• right click on blocks with gun powder can show the spawning rates of hostile mob
• right click on the feather can show passive mob spawning rates while at light level 15

Measuring

Need to enable self me true before using

Right click a point with wooden sword, then right click another one with a wooden one, then it will output:

Coordinates of two points

Y-axis considered while calculating ; Euclidean Distance ; Manhattan distance

Y-axis not considered while calculating ; Euclidean Distance ; Manhattan distance

Signal source finder

Need to enable self rs true before using

Right click the redsone component with wooden rod, replaying the strength of the redstone component (meaningless for repeater), which shows the coordinate of the signal source and its strength also showing white particles above the signal source.