CW2 Cable bridge Heat Set issue... #160
Description
I`ve printed out the "CW2 Cable Bridge.stl" and add the "standard Voron heat set insert". I talk about the one on top for the "Printed_Part_for_CAN_Cable_V1.2.stl" / "Printed Part for USB-C Cable.stl"
i figured out that the hole, designed for this heatSet Insert is tightly toooo small... So material "blobs" out while try to bring the insert into the correct (flush) position...
Because im familiar using CAD i correct this issue.
I add a little more space to match a longer screw.
I always add a little more space on the other heat set insert who the screw comes from the standard voron direct Drive "motor_plate.stl" for match a longer screw, too...
Maybe someone like it...
Use as well...
- but i can't upload it here...