Fixed code lints

Author: shimmy-void

src/ir_Fujitsu.cpp

@@ -2055,7 +2055,7 @@ bool IRrecv::decodeFujitsuAC264(decode_results* results, uint16_t offset,
   // Keep reading bytes until we either run out of message or state to fill.
   match_result_t data_result;
   for (uint16_t i = kFujitsuAc264StateLengthShort;
-       offset <= results->rawlen - 16 && i < kFujitsuAc264StateLengthShort + 
+       offset <= results->rawlen - 16 && i < kFujitsuAc264StateLengthShort +
        restLength; i++, dataBitsSoFar += 8, offset += data_result.used) {
     data_result = matchData(
         &(results->rawbuf[offset]), 8, kFujitsuAcBitMark, kFujitsuAcOneSpace,

src/ir_Fujitsu.h

@@ -176,13 +176,13 @@ union Fujitsu264Protocol {
     // Byte 5
     uint8_t               :8;
     // Byte 6
-    uint8_t RestLength    :8;  // Nr. of bytes in the message after this byte.
+    uint8_t RestLength    :8;   // Nr. of bytes in the message after this byte.
     // Byte 7
-    uint8_t Protocol      :8;  // Seems like a protocol version number. Not sure.
+    uint8_t Protocol      :8;   // Seems like a protocol version number.
     // Byte 8
     uint64_t SubCmd       :1;
     uint64_t              :1;
-    uint64_t Temp         :6; // Temperature in modes except auto
+    uint64_t Temp         :6;   // Temperature in modes except auto
     // Byte 9
     uint64_t Mode             :4;
     uint64_t SleepTimerEnable :1;
@@ -197,7 +197,7 @@ union Fujitsu264Protocol {
     // Byte 13
     uint64_t              :8;
     // Byte 14
-    uint64_t TempAuto     :8; // Temperature in auto mode 
+    uint64_t TempAuto     :8;   // Temperature in auto mode
     // Byte 15
     uint64_t Economy      :1;
     uint64_t              :7;
@@ -214,7 +214,7 @@ union Fujitsu264Protocol {
     uint8_t ClockMins     :8;
     // Byte 21
     uint8_t               :5;
-    uint8_t WeakDry       :1;  // Valid only when mode = dry
+    uint8_t WeakDry       :1;   // Valid only when mode = dry
     uint8_t               :2;
     // Byte 22
     uint8_t TimerEnable   :4;
@@ -263,13 +263,13 @@ const uint8_t kFujitsuAc264CmdOnTimer = 0x39;           // 0b00111001
 const uint8_t kFujitsuAc264CmdOffTimer = 0x3A;          // 0b00111010
 const uint8_t kFujitsuAc264CmdCancelOnOffTimer = 0x3B;  // 0b00111011
 
-const uint8_t kFujitsuAc264SpCmdTogglePowerful = 0xF0;      // 0b11110000
-const uint8_t kFujitsuAc264SpCmdTurnOff = 0xF1;             // 0b11110001
-const uint8_t kFujitsuAc264SpCmdEcoFanOff = 0xF2;           // 0b11110010
-const uint8_t kFujitsuAc264SpCmdEcoFanOn = 0xF3;            // 0b11110011
-const uint8_t kFujitsuAc264SpCmdOutsideQuietOff = 0xF4;     // 0b11110100
-const uint8_t kFujitsuAc264SpCmdOutsideQuietOn = 0xF5;      // 0b11110101
-const uint8_t kFujitsuAc264SpCmdToggleSterilization = 0xF6; // 0b11110110
+const uint8_t kFujitsuAc264SpCmdTogglePowerful = 0xF0;        // 0b11110000
+const uint8_t kFujitsuAc264SpCmdTurnOff = 0xF1;               // 0b11110001
+const uint8_t kFujitsuAc264SpCmdEcoFanOff = 0xF2;             // 0b11110010
+const uint8_t kFujitsuAc264SpCmdEcoFanOn = 0xF3;              // 0b11110011
+const uint8_t kFujitsuAc264SpCmdOutsideQuietOff = 0xF4;       // 0b11110100
+const uint8_t kFujitsuAc264SpCmdOutsideQuietOn = 0xF5;        // 0b11110101
+const uint8_t kFujitsuAc264SpCmdToggleSterilization = 0xF6;   // 0b11110110
 
 const uint8_t kFujitsuAc264FanSpeedAuto = 0x0;    // 0b0000
 const uint8_t kFujitsuAc264FanSpeedQuiet = 0x1;   // 0b0001