VRC720 Z1OpMode values - can't set to 'night'

[andreiandreiandreiandreiandrei]

Hi,

I tried to set Z1OpMode to night, but when I read it is set to day. The other values are ok:

$ ebusctl write -c ctlv3 -V Z1OpMode 'night'; ebusctl r -f -V Z1OpMode
value=night [operation mode of zone 1]

ctlv3 Z1OpMode value=day [operation mode of zone 1]

$ ebusctl write -c ctlv3 -V Z1OpMode 'day'; ebusctl r -f -V Z1OpMode
value=day [operation mode of zone 1]

ctlv3 Z1OpMode value=day [operation mode of zone 1]

$ ebusctl write -c ctlv3 -V Z1OpMode 'off'; ebusctl r -f -V Z1OpMode
value=off [operation mode of zone 1]

ctlv3 Z1OpMode value=off [operation mode of zone 1]

$ ebusctl write -c ctlv3 -V Z1OpMode 'auto'; ebusctl r -f -V Z1OpMode
value=auto [operation mode of zone 1]

ctlv3 Z1OpMode value=auto [operation mode of zone 1]

Where does Home Assistant has the possible values of a definition from, as I see in the .csv files there are no predefined values, but HA has the values auto/day/night/off for the entity:

$ grep Z1OpMode -i /etc/ebusd/ebusd-configuration/ebusd-2.1.x/en/vaillant/15.ctlv3.csv
r;w,,z1OpMode,Betriebsart Zone 1,,,,0600,,,opmode,,,operation mode of zone 1

How is day/night/auto/off defined to be translated from words to ebus commands?

Or does this have to do with the hour of the system and I can't set 'night' over the day? I'll try tonight also.

Thank you