ebusctl commands not working anymore

[martingwb]

Hi,
I have been using an ebus adapter 3.1 (rpi) for modifying timeslots for how water and heating on a Vaillant GeoTherm for some time but since a few days/weeks the behavior changed. While I was able to get a reasonable reply with
ebusctl read -c hwc Timer.Monday it now replies with "ERR: element not found"

Please let me know what steps I need to take to analyze this. I cannot recall that I have changed anything in the environment (apart from an OS - raspbian - update).

Thank you for any kind of help!

$ ebusctl i
version: ebusd 25.1.25.1
update check: OK, device firmware 1[8419] available
device: /dev/ttyAMA0, serial high speed, enhanced, firmware 1.1[e85a].2[73c8]
access: *
signal: acquired
symbol rate: 68
max symbol rate: 212
min arbitration micros: 2
max arbitration micros: 9546
min symbol latency: 0
max symbol latency: 22
scan: finished
reconnects: 0
masters: 6
messages: 647
conditional: 219
poll: 5
update: 66
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=EHP00;SW=0416;HW=7201", loaded "vaillant/08.ehp.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=UIH00;SW=0370;HW=6901", loaded "vaillant/15.uih.csv"
address 23: slave, scanned "MF=Vaillant;ID=EHP00;SW=0416;HW=7201", loaded "vaillant/23.ehp.cc.csv"
address 25: slave, scanned "MF=Vaillant;ID=EHP00;SW=0416;HW=7201", loaded "vaillant/25.ehp.hwc.csv"
address 31: master #8, ebusd
address 36: slave #8, ebusd
address 3f: master #23
address 50: slave, scanned "MF=Vaillant;ID=EHP00;SW=0416;HW=7201", loaded "vaillant/50.ehp.mc.csv"
address 70: master #4
address 75: slave #4, scanned "MF=Vaillant;ID=RC C ;SW=0501;HW=6201", loaded "vaillant/75.rcc.csv"
address 7f: master #24

$ ebusctl find -c 25
scan.25  = Vaillant;EHP00;0416;7201
Scan.25 Id = 21;12;12;0010009069;0006;005164;N3

$ ebusctl find -c 25 Timer
ERR: element not found

[martingwb]

Looks like I figured this out. Instead of "Timer.Monday" I had to use "Timer_Monday" now. Anyone aware when this got changed?