no bai.308523.inc loaded after restart

[andreiandreiandreiandreiandrei]

Hi,

A few days ago I had a power outage. Before that at ebusd start loaded "vaillant/08.bai.csv" and "vaillant/bai.308523.inc". After power recovery, the bai.308523.inc is not loaded anymore. I used some of the definition in homeassistant from that file.

My scan looks like this:

08;Vaillant;BAI00;0807;7603;21;22;11;0010024601;0001;005669;N5
15;Vaillant;CTLV3;0709;3704;21;23;24;0020260915;0953;007392;N4
ec;Vaillant;SOL00;0709;3704;21;23;24;0020260915;0953;007392;N4

and info is this:

version: ebusd 24.1.24.1
update check: version 25.1 available, device firmware v5 1[5511] available, vaillant/08.bai.csv: different version available
device: /dev/ttyAMA0, serial high speed, enhanced, firmware 1.1[5114].1[5114]
signal: acquired
symbol rate: 23
max symbol rate: 171
min arbitration micros: 0
max arbitration micros: 1021
min symbol latency: 3
max symbol latency: 9
scan: finished
reconnects: 0
masters: 3
messages: 506
conditional: 3
poll: 144
update: 16
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=BAI00;SW=0807;HW=7603", loaded "vaillant/08.bai.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=CTLV3;SW=0709;HW=3704", loaded "vaillant/15.ctlv3.csv"
address 31: master #8, ebusd
address 36: slave #8, ebusd, scanning
address ec: slave, scanned "MF=Vaillant;ID=SOL00;SW=0709;HW=3704"

I don't remember if I had the line address ec: slave, scanned "MF=Vaillant;ID=SOL00;SW=0709;HW=3704" line before that restart, but I don't think that could be the problem.

I start ebusd like this:

ebusd -d ens:/dev/ttyAMA0 --scanconfig --mqtthost=localhost --mqttport=1883 --mqttint=/etc/ebusd/mqtt-hassio.cfg --mqttjson --enabledefine

I also tried to load a specific definition I need, but:

# ebusctl define "r,bai,OutdoorstempSensor,d.47 Temp outside,31,08,"B509","0D7600",,,tempsensor,,,Outside temperature (uncorrected value)"
ERR: element not found

Does anybody has any idea of what went wrong and what should I do so I can have again bai.308523.inc loaded? Is it a way to load manually?

Thank you

[andreiandreiandreiandreiandrei]

The problem seems to be with new files from online repository, that detects this duplicate device: ec;Vaillant;SOL00;0709;3704;21;23;24;0020260915;0953;007392;N4 . I started with a January '25 saved version of ebusd-configuration and things came back:

$ ebusctl info | grep address
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=BAI00;SW=0807;HW=7603", loaded "vaillant/bai.308523.inc", "vaillant/08.bai.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=CTLV3;SW=0709;HW=3704", loaded "vaillant/15.ctlv3.csv"
address 31: master #8, ebusd
address 36: slave #8, ebusd

 $ ebusctl scan result
08;Vaillant;BAI00;0807;7603;21;22;11;0010024601;0001;005669;N5
15;Vaillant;CTLV3;0709;3704;21;23;24;0020260915;0953;007392;N4

I will investigate the difference in current online files. Maybe is just a problem of ebusd version which I have to upgrade.

Meanwhile I hit another problem: after the reloading of vaillant/bai.308523.inc file, many of the entities are doubled with _2 sufix in homeassistant, meaning homeassistant detected the already existing entity with the same name. But being the same device (ebusd_bai) I don't understand why HA didn't use the same entity and decided to create a new set. Probably I have to open another discussion on this topic.