|
| 1 | +// Copyright (c) 2004-2020 Microchip Technology Inc. and its subsidiaries. |
| 2 | +// SPDX-License-Identifier: MIT |
| 3 | + |
| 4 | += MEPA-2025.03 |
| 5 | + |
| 6 | +== MEPA-2025.03 |
| 7 | +|=== |
| 8 | +|Version: |MEPA-2025.03 |
| 9 | +|Previous Version: |MEPA-2024.12 |
| 10 | +|Date: |2025-03-27 |
| 11 | +|Description: |Release Notes |
| 12 | +|=== |
| 13 | + |
| 14 | +=== Release Status |
| 15 | + |
| 16 | +==== Bugs Fixed: |
| 17 | + |
| 18 | + * MEPA-984: VSC 1G PHY unable to change MAC i/f ANEG Enable bit 7 in Reg16E3, ie. 16E3.7=serdes_aneg_ena |
| 19 | + * MEPA-999: M10G Reset breaks when booting up application |
| 20 | + * MEPA-891: VSC825x Link Broken when SPI Bus is used as Management |
| 21 | + |
| 22 | +==== New features: |
| 23 | + |
| 24 | + * MEPA-627: EDS2 support in sw-mepa |
| 25 | + * MEPA-560: Cross Connect Sample Application in mepa-demo |
| 26 | + * MEPA-854: MEPA: Updated support for Malibu10G in Jr2 |
| 27 | + * MEPA-880: Malibu10G MEBA Changes and Default Port config changes and remove unwanted GPIO Configurations |
| 28 | + * MEPA-889: Introduced a command to configure the Forced Speed of the PHY similar to that of MAC Ports |
| 29 | + * MEPA-930: Provide API to adjust LAN8814 QSGMII Tx Amplitude |
| 30 | + * MEPA-932: Auto downshift Application Support and ADOC |
| 31 | + |
| 32 | +==== New MEPA API |
| 33 | + |
| 34 | + * MEPA-930: MEPA API to change to control the pre-emphasis level of transmitter output(`mepa_serdes_tx_conf_set`) |
| 35 | + |
| 36 | +==== Known Bugs: |
| 37 | + |
| 38 | + * MEPA-966: LAN8814 QSGMII Serdes Loopback Broken |
| 39 | + * MEPA-124: [Viper] vtss_phy_sd6g_patch_private() corrections and enhancement - NOKIA QSGMII killer patterns |
| 40 | + * MEPA-506: BC/TC 1-step E2E: Reserved field, CF values and origin timestamp is not updating in some of the delay request and Sync packets |
| 41 | + * MEPA-794: 11-Port switch (VSC7514_VSC8504) issue sync-up on QSGMII |
| 42 | + * MEPA-644: SyncE Disable not working in Malibu10G |
| 43 | + * MEPA-793: When MACSec+1588 Enabled using VSC8584, after oos_mitigation there is very large PTP Offsets |
| 44 | + * MEPA-741: VSC8258 L1 Loopback Fails |
| 45 | + |
| 46 | + |
0 commit comments