zinitix touchscreen doesn't work at all (samsung-gt58)

[MaksymUserAgent]

The touchscreen shows up as:
input: Zinitix Capacitive TouchScreen as /devices/platform/soc@0/78b9000.i2c/i2c-3/3-0020/input/input4
But the driver throws these errors:

Zinitix-TS 3-0020: Failed to send power sequence(vendor cmd enable)
Zinitix-TS 3-0020: Error while sending power-on sequence: -6

As a result, the touchscreen is completely non functional. I have tried a bunch of different builds of postmarketOS, and the issue persists. Also, the touchscreen worked fine in the stock android, and in a custom android 12 rom I tried before pmos.

I am 99% sure that the screen is original (bought the device off ebay used), but my model is the SM-T357T, which isn't explicitly documented on the wiki page for this device.

Any ideas for what I can try? I am completely clueless when it comes to i2c and driver debugging.

dmesg: https://pastebin.com/Mmy94jhL

[MaksymUserAgent]

I have obtained an sm-t350 device, where touch works normally. After swapping the displays between them, I can confirm that the mainboard is the part that is incompatible, not the digitizer. The t350 digitizer errors out in the same way as the original t357t digitizer, when connected to the t357t board