Merge pull request #489 from netscaler/new_resources

Added new resources and upgraded nitro_resource_map to latest version

Author: shivashankar-vaddepally

plugins/module_utils/nitro_resource_map.py

@@ -240,12 +240,17 @@
       - DISABLED
       - AUTH
       - VPN
+      - PORTAL
+      - MANAGED
     description:
       - Entities for which WAF Protection need to be applied.
       - 'Available settings function as follows:'
+      - '* C(MANAGED) - Both C(AUTH) and C(VPN) Protecions are enabled, This is default
+        value for wafProtection'
       - '* C(AUTH) - Endpoints used for Authentication applicable for both AAATM,
         IDP, GATEWAY use cases.'
       - '* C(VPN) - Endpoints used for Gateway use cases.'
+      - '* C(PORTAL) - Endpoints related to web portal.'
       - '* C(DISABLED) - No Endpoint WAF protection.'
       - Currently supported only in default partition
     elements: str

plugins/modules/aaaparameter.py

@@ -83,9 +83,8 @@
     choices:
       - ipfix
       - logstream
-      - rest
     description:
-      - 'Type of collector: either C(logstream) or C(ipfix) or C(rest).'
+      - 'Type of collector: either C(logstream) or C(ipfix) or rest.'
 extends_documentation_fragment: netscaler.adc.netscaler_adc
 
 """

plugins/modules/appflowcollector.py

@@ -104,6 +104,7 @@
       - DOT
       - ADNS_DOT
       - HTTP_QUIC
+      - ADNS_DOH
     description:
       - The type of bound service
   delay:

plugins/modules/cloudprofile.py

@@ -114,6 +114,24 @@
     type: float
     description:
       - Minimum quantum of data to be filled before compression begins.
+  randomgzipfilename:
+    type: str
+    choices:
+      - ENABLED
+      - DISABLED
+    description:
+      - Control the addition of a random filename of random length in the GZIP header
+        to apply the Heal-the-BREACH mitigation for the BREACH attack.
+  randomgzipfilenamemaxlength:
+    type: float
+    description:
+      - Maximum length of the random filename to be added in the GZIP header to apply
+        the Heal-the-BREACH mitigation for the BREACH attack.
+  randomgzipfilenameminlength:
+    type: float
+    description:
+      - Minimum length of the random filename to be added in the GZIP header to apply
+        the Heal-the-BREACH mitigation for the BREACH attack.
   servercmp:
     type: str
     choices:

plugins/modules/cmpparameter.py

@@ -163,6 +163,13 @@
     description:
       - Continue forwarding the traffic to backup virtual server even after the primary
         server comes UP from the DOWN state.
+  dnsoverhttps:
+    type: str
+    choices:
+      - ENABLED
+      - DISABLED
+    description:
+      - This option is used to enable/disable DNS over HTTPS (DoH) processing.
   dnsprofilename:
     type: str
     description:

plugins/modules/csvserver.py

@@ -43,7 +43,7 @@
   memlimit:
     type: float
     description:
-      - Amount of Citrix ADC memory to reserve for the memory used by LSN and Subscriber
+      - Amount of NetScaler memory to reserve for the memory used by LSN and Subscriber
         Session Store feature, in multiples of 2MB.
       - ''
       - 'Note: If you later reduce the value of this parameter, the amount of active

plugins/modules/extendedmemoryparam.py

@@ -38,13 +38,20 @@
         the module's parameters.
       - When C(unset), the resource will be unset on the NetScaler ADC node.
     type: str
-  edtlossy:
+  dfpersistence:
     type: str
     choices:
       - ENABLED
       - DISABLED
     description:
-      - Enable/Disable EDT Lossy feature
+      - Enable/Disable DF Persistence
+  edtlosstolerant:
+    type: str
+    choices:
+      - ENABLED
+      - DISABLED
+    description:
+      - Enable/Disable EDT Loss Tolerant feature
   edtpmtuddf:
     type: str
     choices:

plugins/modules/icaparameter.py

@@ -123,7 +123,7 @@
       - '* 10 - Indicates a 10 Gbps port.'
       - '* LA - Indicates a link aggregation port.'
       - '* LO - Indicates a loop back port.'
-      - U is a unique integer for representing an interface in a particular port group.
+      - 'U is a unique integer for representing an interface in a particular port group.'
   ifalias:
     type: str
     description:
@@ -294,7 +294,8 @@
     description:
       - This argument is deprecated by tagall.
   trunkallowedvlan:
-    type: str
+    type: list
+    elements: str
     description:
       - 'VLAN ID or range of VLAN IDs will be allowed on this trunk interface. In
         the command line interface, separate the range with a hyphen. For example:

plugins/modules/interface.py

@@ -202,6 +202,13 @@
       - DISABLED
     description:
       - This argument is for enabling/disabling the dns64 on lbvserver
+  dnsoverhttps:
+    type: str
+    choices:
+      - ENABLED
+      - DISABLED
+    description:
+      - This option is used to enable/disable DNS over HTTPS (DoH) processing.
   dnsprofilename:
     type: str
     description:

plugins/modules/lbvserver.py

@@ -45,8 +45,7 @@
     description:
       - Name of the location file, with or without absolute path. If the path is not
         included, the default path (/var/netscaler/locdb) is assumed. In a high availability
-        setup, the static database must be stored in the same location on both Citrix
-        ADCs.
+        setup, the static database must be stored in the same location on both NetScalers.
   format:
     type: str
     choices:
@@ -62,7 +61,7 @@
       - geoip-country-isp
       - geoip-city-isp-org
     description:
-      - Format of the location file. Required for the Citrix ADC to identify how to
+      - Format of the location file. Required for the NetScaler to identify how to
         read the location file.
   src:
     type: str

plugins/modules/locationfile.py

@@ -46,15 +46,15 @@
       - Name of the IPv6 location file, with or without absolute path. If the path
         is not included, the default path (/var/netscaler/locdb) is assumed. In a
         high availability setup, the static database must be stored in the same location
-        on both Citrix ADCs.
+        on both NetScalers.
   format:
     type: str
     choices:
       - netscaler6
       - geoip-country6
     description:
-      - Format of the IPv6 location file. Required for the Citrix ADC to identify
-        how to read the location file.
+      - Format of the IPv6 location file. Required for the NetScaler to identify how
+        to read the location file.
   src:
     type: str
     description: