-
Notifications
You must be signed in to change notification settings - Fork 1
DOP3000 3010 parameters
Till Zürner edited this page Feb 8, 2020
·
3 revisions
This page (will) list the available parameter names for the DOP3000 parameter class. The parameter description is taken from the DOP3000 user manual. Some parameter values are adjusted to meaningful/human readable values.
| Description | Parameter string |
|---|---|
| File version | 'version' |
| File comment | 'comment' |
| Hardware information | 'hardware' |
These parameters exist for each of the 10 channels (even for the DOP3000). They are differentiated by the prefix 'ch<n>_', where <n> is the channel number. For example, the emitting frequency for channel 3 is 'ch3_emitFreq'. The DOP3000 and the front input of the DOP3010 always use channel 1.
| Description | Parameter name |
|---|---|
| TGC amplification values | 'tcg' |
| Emitting frequency in kHz | 'emitFreq' |
| assisted Mode: 1 if true | 'assistMode' |
| User Depth in mm | 'userDepth' |
| User Velocity in mm/s | 'userVelo' |
| Quality factor (between 0 and 1000) | 'qualityFactor' |
| PRF in us | 'prf' |
| Emission enable if 1 | 'emitEnable' |
| Emitting power (0=Low, 1=medium, 2=High) | 'emitPower' |
| Burst length | 'burstLength' |
| Indice first gate | 'gate1' |
| Resolution (n+1)*0.166ns | 'resolution' |
| if 1 auto resolution mode | 'resolutionAuto' |
| if 1 auto selection of number of gates | 'gateNAuto' |
| Number of gates | 'gateN' |
| Number of emissions/profile | 'emitNprofile' |
| Velocity scale factor (between 0 and 3141) | 'veloScale' |
| Wall filter coefficient * 1000 | 'wallFilterCoeff' |
| Number of emissions for stabilization | 'emitNstabil' |
| Sensitivity parameter | 'sensitivity' |
| Sound speed in m/s | 'soundSpeed' |
| Doppler angle in degrees | 'dopplerAngle' |
| Module scale (between 256 and 2048) | 'moduleScale' |
| Velocity offset | 'veloOffset' |
| Tgc Mode (0:uniform, 1:slope, 2:auto, 3 custom) | 'tgcMode' |
| Tgc value at the beginning (between 0 and 256) | 'tgcStart' |
| Tgc value at the end (between 0 and 256) | 'tgcEnd' |
| TGC gate size (0:0.666 ns 1: 1.333 ns) | 'tgcGateSize' |
| Bandwidth definition (from 50 kHz (0) to 300 kHz(5), step 50 kHz | 'bandwidth' |
| Overall gain 0: 0db 1:6dB, 2:14 dB, 3:20dB | 'gainOverall' |
| 0: acquisition rate 6 MHz, 1: 12 or 40 MHz | 'aquisitionRate' |
| internal use | '_internal_1' |
| Type of measurements | 'profileType' |
| Display: 0 horizontal 1: vertical | 'display' |
| Max number of profiles in a block | 'profileNmax' |
| Trigger mode: If set external trigger mode | 'triggerExternal' |
| Trigger mode: If set trigger on a low logic level | 'triggerLowLevel' |
| Number of profiles keep before trigger | 'profileNtrigger' |
| Filter 0:none 1:Moving average, 2 median | 'filter' |
| Nb profiles used in moving average | 'movAvgProfileN' |
| if 1 zero rejected in moving average | 'movAvgRejectZero' |
| Nb profiles kept before pressing record | 'profileNrecord' |
| Record binary data file | 'recordBinary' |
| Record ASCII data file | 'recordAscii' |
| Record Statistical ASCII data file | 'recordStatAscii' |
| internal use | '_internal_2' |
| internal use | '_internal_3' |
| if 1, emit and receive on the BNC probe In/Out | 'useInOutProbe' |
| internal use | '_internal_4' |
| internal use | '_internal_5' |
| hardware Internal delay in ns | 'hardwareDelay' |
| Trigger delay in ms | 'triggerDelay' |
| Trigger Number of recorded profiles in Block | 'profileNblock' |
| Trigger: Number of blocks | 'blockN' |
| Trigger: Auto record starting counter value | 'recordAuto' |
| Nb profiles in block in multiplexer mode | 'multi_profileNblock' |
| Nb of profiles used by median filter | '' |
| Multiplexer enabled | 'multi' |
| UDV MD mode | 'udvmd' |
| UDV 3D, else UDV 2D | 'udv3d' |
| Channel 1 selected | 'useCh1' |
| Channel 2 selected | 'useCh2' |
| Channel 3 selected | 'useCh3' |
| Channel 4 selected | 'useCh4' |
| Channel 5 selected | 'useCh5' |
| Channel 6 selected | 'useCh6' |
| Channel 7 selected | 'useCh7' |
| Channel 8 selected | 'useCh8' |
| Channel 9 selected | 'useCh9' |
| Channel 10 selected | 'useCh10' |
| First channel: 1 | 'channelFirst1' |
| First channel: 2 | 'channelFirst2' |
| First channel: 3 | 'channelFirst3' |
| First channel: 4 | 'channelFirst4' |
| First channel: 5 | 'channelFirst5' |
| First channel: 6 | 'channelFirst6' |
| First channel: 7 | 'channelFirst7' |
| First channel: 8 | 'channelFirst8' |
| First channel: 9 | 'channelFirst9' |
| First channel: 10 | 'channelFirst10' |
| First channel: ? | 'channelFirst11' |
| First channel: ? | 'channelFirst12' |
| First channel: ? | 'channelFirst13' |
| First channel: ? | 'channelFirst14' |
| First channel: ? | 'channelFirst15' |
| First channel: ? | 'channelFirst16' |
| First channel: ? | 'channelFirst17' |
| Nb blocks in multiplexer mode | 'multi_blockN' |
| Nb of profiles used by median filter | 'medianProfileN' |
| if 1, echo mode | 'echoMode' |
| internal use | 'internal_6' |
| internal use | '_internal_7' |
| number of points for gate FFT | 'gateFftPointN' |
| if 1, Gate FFT use Haming window | 'gateFftHaming' |
| internal use | '_internal_8' |
| Time scale for V(t) in ms | 'vtTimeScale' |
| sound speed measuring distance in m*10 | 'soundSpeedDist' |
| UDV MD, emit probe reference | 'udvmd_emitProbe' |
| UDV MD, receive probe reference | 'udvmd_receiveProbe' |
| UDV MD, distance between probes, mm*10 | 'udvmd_distProbe' |
| UDV MD, Doppler angle in deg | 'udvmd_dopplerAngle' |
| UDV MD, Vx max in mm/s *10 | 'udvmd_veloXmax' |
| UDV MD, Vy max in mm/s *10 | 'udvmd_veloYmax' |
| UDV MD, Vz max in mm/s *10 | 'udvmd_veloZmax' |
| UDV MD, TR1 frequency offset -127 -> 128 | 'udvmd_tr1FreqOff' |
| UDV MD, TR2 frequency offset -127 -> 128 | 'udvmd_tr2FreqOff' |
| UDV MD, TR3 frequency offset -127 -> 128 | 'udvmd_tr3FreqOff' |
| UDV MD, Scale angle for TR1, in rad*1000 | 'udvmd_tr1ScaleAngle' |
| UDV MD, Scale angle for TR2, in rad*1000 | 'udvmd_tr2ScaleAngle' |
| UDV MD, Scale angle for TR3, in rad*1000 | 'udvmd_tr3ScaleAngle' |
| UDV MD, Module scale for TR1 | 'udvmd_tr1ModuleScale' |
| UDV MD, Module scale for TR2 | 'udvmd_tr2ModuleScale' |
| UDV MD, Module scale for TR3 | 'udvmd_tr3ModuleScale' |
| UDV MD, depth from in mm | 'udvmd_depthFrom' |
| UDV MD, depth to in mm | 'udvmd_depthTo' |
| UDV MD, Resolution mm*10 | 'udvmd_resolution' |
| UDV MD, quality factor | 'udvmd_qualityFactor' |
| Current channel | 'channelCurrent' |
| skip profile | 'profileSkip' |
| Simul Velocity scale factor | 'simul_veloScaleFactor' |
| liquid attenuation in dB/cm * 1000 | 'liquidAttenuation' |
| Simul selected gate in IQ display | 'simul_gateIQ' |
| none | '_internal_9' |
| UDV MD Nb skipped vectors | 'udvmd_vectorSkipN' |
| Raw data acquisition, Nb PRF | 'rawData_prfN' |
| Raw data acquisition, Nb gates | 'rawData_gateN' |
| Raw data acquisition, First gate | 'rawData_gate1' |
| Overall gain in dB | 'gainOverall2' |
| Cursor 1 on gate | 'cursor1' |
| Cursor 2 on gate | 'cursor2' |
| Cursor 3 on gate | 'cursor3' |
| Cursor 4 on gate | 'cursor4' |
| UDV 2D/3D simulation, from | 'udv2d3dsim_from' |
| UDV 2D/3D simulation, To | 'udv2d3dsim_to' |
| UDV 2D/3D simulation, X source pos | 'udv2d3dsim_sourceXpos' |
| UDV 2D/3D simulation, Y source pos | 'udv2d3dsim_sourceYpos' |
| UDV 2D/3D simulation, Z source pos | 'udv2d3dsim_sourceZpos' |
| Max attenuation in simulation in dB | 'simul_attenuationMax' |
| UDV 2D/3D simulation, Part density | 'udv2d3dsim_partDensity' |
| UDV 2D/3D simulation, Velocity field type | 'udv2d3dsim_veloFieldType' |
| UDV 2D/3D simulation, Rotation speed | 'udv2d3dsim_rotSpeed' |
| UDV 2D/3D simulation, Shift TR1 | 'udv2d3dsim_tr1Shift' |
| UDV 2D/3D simulation, Shift TR2 | 'udv2d3dsim_tr2Shift' |
| UDV 2D/3D simulation, Shift TR3 | 'udv2d3dsim_tr3Shift' |
| UDV 2D/3D simulation, Adapt PRF | 'udv2d3dsim_prfAdapt' |
| Flow rate unit | 'flowRateUnit' |
| Flow rate scale | 'flowRateScale' |
| Auto Correct Aliasing Control word 1 | 'aliasAutorCorr1' |
| Auto Correct Aliasing Control word 2 | 'aliasAutorCorr2' |
| sound speed in wall | 'wallSoundSpeed' |
| Length of wall | 'wallLength' |
| sound speed in couplant | 'couplantSoundSpeed' |
| length of couplant | 'couplantLength' |
| US emitting frequency divider | 'emitFreqDivider' |
| demodulation frequency divider | 'demodFreqDivider' |
| DOP4000 control register 1 | 'dop4000_crtlReg1' |
| DOP4000 control register 2 | 'dop4000_crtlReg2' |
| Nb classes for histogram | 'histClassN' |
- 0 : Data_Type_Velocity
- 1 : Data_Type_Echo
- 2 : Data_Type_Energy
- 3 : Data_Type_Gate_FFT
- 4 : Data_Type_Phase_deg_10
- 5 : Data_Type_Vitson
- 6 : Data_Type_Frequency
- 7 : Data_Type_Frequency_TR1
- 8 : Data_Type_Frequency_TR2
- 9 : Data_Type_Frequency_TR3
- 10 :Data_Type_Echo_TR1
- 11 : Data_Type_Echo_TR2
- 12 : Data_Type_Echo_TR3
- 13 : Data_Type_Energy_TR1
- 14 : Data_Type_Energy_TR2
- 15 : Data_Type_Energy_TR3
- 16 : Data_Type_Velocity_mm_s_10;
- 17 : Data_Type_Velocity_mm_s
- 18 : Data_Type_Flow_ml_min
- 19 : Data_Type_Diameter_10
- 20 : Data_Type_Aliasing_Refer
- 21 : Data_Type_Aliasing_Refer_TR1
- 22 : Data_Type_Aliasing_Refer_TR2
- 23 : Data_Type_Aliasing_Refer_TR3
- 24 : Data_Type_Frequency_Hz_10
- 25 : Data_Type_Depth_mm_10
- 28 : Data_Type_TGC
- 29 : Data_Type_IQ
- 30 : Data_Type_Angle_Deg_10
- 0 : ml/min
- 1 : ml/s
- 2 : dl/s