Flags signification

[dan73800]

Hi

First of all, thanks for your project, it is very nice for my shades.
Reading your integration documentation, I can see:
flags - Bitmask for the sensor flags
0x01 - Sun sensor is on
0x04 - Sensor is in demo mode
0x10 - It is windy
0x20 - It is sunny

When I run a REST command, it returns a flags of 50. What does it mean ?
Can someone explain me how it works ?

Thanks and have a nice day.

[merdusud]

Hello.
If you tick the ‘Has Sun sensor’ box in the blind configuration, and assuming that ‘windy’ and “sunny” are set to ‘On’, and assuming that ‘Sun sensor’ is neither activated nor in demo mode, you will get the value 50 in the “flags” field when you run the command "http://local_IP:8081/controller. With ‘windy’ and ‘sunny’ set to “On”, you will already get 30 in hexadecimal, or 48 in decimal. Ticking the ‘Has Sun sensor’ box is therefore worth 2.
Even if you do not have a wind/sun sensor, you can try it out. Thank you for your feedback. I ran the test about ten times to be sure, using different combinations. I am also equipped with a ‘Soliris RTS’ wind/sun sensor, but I think you can try it without one. The ‘Sunny’ and ‘Windy’ values can be forced manually either via the ESPSomfy interface or via a home automation solution.
This would suggest that the documentation may be incomplete on this point, but I remain cautious in saying this.
I would therefore appreciate some feedback.

Translated with DeepL.com (free version)