Update PointOneNav pricing

Increase from $50 to $150 - Source: https://pointonenav.com/news/polaris-rtk-survey-grade/

Author: nseidle

docs/correction_sources.md

@@ -26,7 +26,7 @@ These companies set up a large number of reference stations that cover entire re
 
 - [PointPerfect](https://docs.sparkfun.com/SparkFun_RTK_Everywhere_Firmware/quickstart-torch/#pointperfect-corrections) ($8/month) - US, EU, as well as parts of Australia, Brazil, and South Korea. Note: This is an [SSR service](https://docs.sparkfun.com/SparkFun_RTK_Everywhere_Firmware/correction_sources/#osr-vs-ssr).
 - [Onocoy](https://console.onocoy.com/explorer) ($25/month) - US, EU, Australia, and many other partial areas
-- [PointOneNav](https://app.pointonenav.com/trial?src=sparkfun) ($50/month) - US, EU, Australia, South Korea
+- [PointOneNav](https://app.pointonenav.com/trial?src=sparkfun) ($150/month) - US, EU, Australia, South Korea
 - [Skylark](https://www.swiftnav.com/skylark) ($29 to $69/month) - US, EU, Japan, Australia
 - [SensorCloud RTK](https://rtk.sensorcloud.com/pricing/) ($100/month) partial US, EU
 - [Premium Positioning](https://www.premium-positioning.com) (~$315/month) partial EU
@@ -108,4 +108,4 @@ Various SparkFun RTK products support this new GNSS band (E6):
 * The RTK EVK does not support E6 reception.
 * The RTK Facet mosaic's mosaic-X5 supports E6 reception. However, at the time of writing, the X5 firmware does not yet support the HAS service. Septentrio are planning to support it in a future firmware release.
 * The RTK Postcard's LG290P GNSS receiver has the ability to receive the E6 signals but as of writing, HAS is not yet implemented in the GNSS location engine.
-* The RTK Torch will need UM980 firmware 118333 or newer. See how to [Update the UM980 Firmware](./firmware_update_um980.md) for instructions. HAS/E6 is enabled by default and can be disabled in the [GNSS Menu](menu_gnss.md#galileo-e6-corrections) if desired.
+* The RTK Torch fully supports HAS/E6. The UM980 firmware needs to be 11833 or newer. See how to [Update the UM980 Firmware](./firmware_update_um980.md) for instructions. HAS/E6 is enabled by default and can be disabled in the [GNSS Menu](menu_gnss.md#galileo-e6-corrections) if desired.

docs/quickstart-facet-mosaic.md

@@ -116,7 +116,7 @@ You can now use your RTK device to measure points with good (meter) accuracy. If
 
 To get millimeter accuracy we need to provide the RTK unit with correction values. Corrections, often called RTCM, help the RTK unit refine its position calculations. RTCM (Radio Technical Commission for Maritime Services) can be obtained from a variety of sources but they fall into three buckets: Commercial, Public, and Civilian Reference Stations.
 
-See [Corrections Sources](correction_sources.md) for a breakdown of the options and the pros and cons of each. For this quickstart, we'll be showing two examples: using PointPerfect L-Band for $50 a month (a little less accurate but nation-wide coverage) and PointOne Nav for $50 a month (maximum accuracy, gaps in the coverage area).
+See [Corrections Sources](correction_sources.md) for a breakdown of the options and the pros and cons of each. For this quickstart, we'll be showing two examples: using PointPerfect L-Band for $50 a month (a little less accurate but nation-wide coverage) and PointOne Nav for $150 a month (maximum accuracy, gaps in the coverage area).
 
 ## PointPerfect Corrections
 
@@ -214,7 +214,7 @@ If you decide to use a service that provides NTRIP (as opposed to PointPerfect)
 1. Create an account on [PointOneNav](https://app.pointonenav.com/trial?src=sparkfun).
 
 	!!! note
-		This service costs $50 per month at the time of writing.
+		This service costs $150 per month at the time of writing.
 
 2. Open SW Maps and connect to the RTK device over Bluetooth.