hr_router: no propagation of `StandardMem::Request` during initialization from custom component

[Dherse]

Hello,

I am using a simple configuration as follows:

In practice, there are more components, but this is essentially it.

Actual configuration code with some redaction

import os
import sys
import sst


cpu = sst.Component("core", "my.custom_component")
cpu.addParams({
    <redacted>
})

iface = cpu.setSubComponent("mem", "memHierarchy.standardInterface")
iface.addParams({"verbose": 0, "debug": 0, "debug_level": 0})

cpu_nic = iface.setSubComponent("memlink", "memHierarchy.MemNIC")
cpu_nic.addParams({"group": 0, "network_bw": "25GB/s"})

chiprtr = sst.Component("chiprtr", "merlin.hr_router")
chiprtr.addParams({
    "id": 0,
    "num_ports": "2",
    "input_buf_size": "4kB",
    "output_buf_size": "4kB",
    "flit_size": "8B",
    "xbar_bw": "4GB/s",
    "link_bw": "4GB/s",
    "link_latency": "1ns",
    "input_latency": "1ns",
    "output_latency": "1ns",
    "topology": "merlin.singlerouter",
})
chiprtr.setSubComponent("topology", "merlin.singlerouter")

memctrl = sst.Component("memory", "memHierarchy.MemController")
memctrl.addParams({
    "debug" : 0,
    "debug_level" : 10,
    "clock" : "1GHz",
    "addr_range_end" : 512*1024*1024-1,
})
mem_nic = memctrl.setSubComponent("cpulink", "memHierarchy.MemNIC")
mem_nic.addParams({"group" : 1, "network_bw" : "25GB/s"})

memory = memctrl.setSubComponent("backend", "memHierarchy.simpleMem")
memory.addParams({
    "access_time" : "10 ns",
    "mem_size" : "512MiB",
    "request_width": 64,
})

link_cpu_rtr = sst.Link("link_cpu")
link_cpu_rtr.connect( (cpu_nic, "port", "100ps"), (chiprtr, "port0", "100ps") )

link_mem_rtr = sst.Link("link_mem")
link_mem_rtr.connect( (mem_nic, "port", "100ps"), (chiprtr, "port1", "100ps") )

My problem arises during initialization, in my custom component, I am trying to use SST::Interface::StandardMem::sendUntimedData() to send SST::Interface::StandardMem::Write requests containing data I would like to be present in my memory. But it does not work, as far as I can tell, it does not end up writing to memory.

However, if I remove the merlin router, and connect the memory and custom component directly (using memHierarchy.MemLink instead of memHierarchy.MemNIC, then it initializes just fine. Reading some of the CPP source. Notably:

sst-elements/src/sst/elements/merlin/hr_router/hr_router.cc

Line 463 in 0d61200

hr_router::init(unsigned int phase)

and

sst-elements/src/sst/elements/merlin/topology/singlerouter.cc

Line 54 in 0d61200

void topo_singlerouter::routeUntimedData(int port, internal_router_event* ev, std::vector<int> &outPorts)

It looks to me like routing of messages should occur during initialization, therefore I am wondering the following:

• Is this a config issue with the MemNIC
• Or is it a config issue with the hr_router
• Or is it a config issue with the topology of the router
• Or is is not implemented in one of the components being used here?

Any help would be appreciated. Thanks in advance,

Sébastien