fix eagle in Pr2917 #163

Workflow file for this run

.github/workflows/vllm_ascend_test_full.yaml at 98290e6

	#
	# Copyright (c) 2025 Huawei Technologies Co., Ltd. All Rights Reserved.
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# This file is a part of the vllm-ascend project.
	#
	name: 'test-full'

	on:
	pull_request:
	branches:
	- 'main'
	- '*-dev'
	types: [ labeled ]

	# Bash shells do not use ~/.profile or ~/.bashrc so these shells need to be explicitly
	# declared as "shell: bash -el {0}" on steps that need to be properly activated.
	# It's used to activate ascend-toolkit environment variables.
	defaults:
	run:
	shell: bash -el {0}

	# only cancel in-progress runs of the same workflow
	# and ignore the lint / 1 card / 4 cards test type
	concurrency:
	group: ${{ github.workflow }}-${{ github.ref }}
	cancel-in-progress: true

	jobs:
	# changes:
	# runs-on: ubuntu-latest
	# if: ${{ contains(github.event.pull_request.labels..name, 'ready') && contains(github.event.pull_request.labels..name, 'ready-for-test') }}
	# outputs:
	# e2e_tracker: ${{ steps.filter.outputs.e2e_tracker }}
	# ut_tracker: ${{ steps.filter.outputs.ut_tracker }}
	# steps:
	# - uses: actions/checkout@v4
	# - uses: dorny/paths-filter@v3
	# id: filter
	# with:
	# filters: \|
	# e2e_tracker:
	# - '.github/workflows/vllm_ascend_test.yaml'
	# - 'vllm_ascend/**'
	# - 'csrc/**'
	# - 'cmake/**'
	# - 'tests/e2e/**'
	# - 'CMakeLists.txt'
	# - 'setup.py'
	# - 'requirements.txt'
	# - 'requirements-dev.txt'
	# - 'requirements-lint.txt'
	# - 'packages.txt'
	# ut_tracker:
	# - 'tests/ut/**'

	e2e-full:
	# only trigger full test when pull request is approved
	#needs: [changes]
	#if: ${{ needs.changes.outputs.e2e_tracker == 'true' }}
	strategy:
	max-parallel: 2
	matrix:
	os: [linux-aarch64-a2-1]
	vllm_version: [v0.10.2]
	name: singlecard e2e test - full
	runs-on: ${{ matrix.os }}
	container:
	image: swr.cn-southwest-2.myhuaweicloud.com/base_image/ascend-ci/cann:8.2.rc1-910b-ubuntu22.04-py3.11
	env:
	VLLM_LOGGING_LEVEL: ERROR
	VLLM_USE_MODELSCOPE: True
	steps:
	- name: Check npu and CANN info
	run: \|
	npu-smi info
	cat /usr/local/Ascend/ascend-toolkit/latest/"$(uname -i)"-linux/ascend_toolkit_install.info

	- name: Config mirrors
	run: \|
	sed -Ei 's@(ports\|archive).ubuntu.com@cache-service.nginx-pypi-cache.svc.cluster.local:8081@g' /etc/apt/sources.list
	pip config set global.index-url http://cache-service.nginx-pypi-cache.svc.cluster.local/pypi/simple
	pip config set global.trusted-host cache-service.nginx-pypi-cache.svc.cluster.local
	apt-get update -y
	apt install git -y

	- name: Checkout vllm-project/vllm-ascend repo
	uses: actions/checkout@v4

	- name: Install system dependencies
	run: \|
	apt-get -y install `cat packages.txt`
	apt-get -y install gcc g++ cmake libnuma-dev

	- name: Checkout vllm-project/vllm repo
	uses: actions/checkout@v4
	with:
	repository: vllm-project/vllm
	ref: ${{ matrix.vllm_version }}
	path: ./vllm-empty

	- name: Install vllm-project/vllm from source
	working-directory: ./vllm-empty
	run: \|
	VLLM_TARGET_DEVICE=empty pip install -e .

	- name: Install vllm-project/vllm-ascend
	env:
	PIP_EXTRA_INDEX_URL: https://mirrors.huaweicloud.com/ascend/repos/pypi
	run: \|
	pip install -r requirements-dev.txt
	pip install -v -e .

	- name: Run e2e test
	env:
	VLLM_WORKER_MULTIPROC_METHOD: spawn
	VLLM_USE_MODELSCOPE: True
	run: \|
	# We found that if running aclgraph tests in batch, it will cause AclmdlRICaptureBegin error. So we run
	# the test separately.

	# pytest -sv tests/e2e/singlecard/test_aclgraph.py
	# pytest -sv tests/e2e/singlecard/test_ascend_scheduler.py
	# pytest -sv tests/e2e/singlecard/test_camem.py
	# pytest -sv tests/e2e/singlecard/test_chunked.py
	# pytest -sv tests/e2e/singlecard/test_embedding.py
	# pytest -sv tests/e2e/singlecard/test_guided_decoding.py
	# pytest -sv tests/e2e/singlecard/test_ilama_lora.py
	# pytest -sv tests/e2e/singlecard/test_profile_execute_duration.py
	# pytest -sv tests/e2e/singlecard/test_quantization.py
	# pytest -sv tests/e2e/singlecard/test_sampler.py
	# pytest -sv tests/e2e/singlecard/test_vlm.py

	# ------------------------------------ v1 spec decode test ------------------------------------ #
	# pytest -sv tests/e2e/singlecard/spec_decode_v1/test_v1_mtp_correctness.py
	# pytest -sv tests/e2e/singlecard/spec_decode_v1/test_v1_mtp_torchair_correctness.py
	pytest -sv tests/e2e/singlecard/spec_decode_v1/test_v1_spec_decode.py

	#pytest -sv tests/e2e/singlecard/ops/

	#e2e-2-cards-full:
	# only trigger full test when pull request is approved
	# needs: [changes]
	# if: ${{ needs.changes.outputs.e2e_tracker == 'true' }}
	# strategy:
	# max-parallel: 2
	# matrix:
	# os: [linux-aarch64-a2-2]
	# vllm_version: [v0.10.2]
	# name: multicard e2e test - full
	# runs-on: ${{ matrix.os }}
	# container:
	# image: swr.cn-southwest-2.myhuaweicloud.com/base_image/ascend-ci/cann:8.2.rc1-910b-ubuntu22.04-py3.11
	# env:
	# VLLM_LOGGING_LEVEL: ERROR
	# VLLM_USE_MODELSCOPE: True
	# steps:
	# - name: Check npu and CANN info
	# run: \|
	# npu-smi info
	# cat /usr/local/Ascend/ascend-toolkit/latest/"$(uname -i)"-linux/ascend_toolkit_install.info

	# - name: Config mirrors
	# run: \|
	# sed -Ei 's@(ports\|archive).ubuntu.com@cache-service.nginx-pypi-cache.svc.cluster.local:8081@g' /etc/apt/sources.list
	# pip config set global.index-url http://cache-service.nginx-pypi-cache.svc.cluster.local/pypi/simple
	# pip config set global.trusted-host cache-service.nginx-pypi-cache.svc.cluster.local
	# apt-get update -y
	# apt install git -y

	# - name: Checkout vllm-project/vllm-ascend repo
	# uses: actions/checkout@v4

	# - name: Install system dependencies
	# run: \|
	# apt-get -y install `cat packages.txt`
	# apt-get -y install gcc g++ cmake libnuma-dev

	# - name: Checkout vllm-project/vllm repo
	# uses: actions/checkout@v4
	# with:
	# repository: vllm-project/vllm
	# ref: ${{ matrix.vllm_version }}
	# path: ./vllm-empty

	# - name: Install vllm-project/vllm from source
	# working-directory: ./vllm-empty
	# run: \|
	# VLLM_TARGET_DEVICE=empty pip install -e .

	# - name: Install vllm-project/vllm-ascend
	# env:
	# PIP_EXTRA_INDEX_URL: https://mirrors.huaweicloud.com/ascend/repos/pypi
	# run: \|
	# pip install -r requirements-dev.txt
	# pip install -v -e .

	# - name: Run vllm-project/vllm-ascend test
	# env:
	# VLLM_WORKER_MULTIPROC_METHOD: spawn
	# VLLM_USE_MODELSCOPE: True
	# run: \|
	# pytest -sv tests/e2e/multicard/test_data_parallel.py
	# pytest -sv tests/e2e/multicard/test_expert_parallel.py
	# # external_launcher test is not stable enough. Fix it later
	# # pytest -sv tests/e2e/multicard/test_external_launcher.py
	# pytest -sv tests/e2e/multicard/test_fused_moe_allgather_ep.py
	# pytest -sv tests/e2e/multicard/test_ilama_lora_tp2.py

	# # To avoid oom, we need to run the test in a single process.
	# pytest -sv tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_QwQ
	# pytest -sv tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_DeepSeek_multistream_moe
	# pytest -sv tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_Qwen3_W8A8
	# pytest -sv tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_Qwen3_W4A8DYNAMIC
	# pytest -sv tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_DeepSeek_W4A8DYNAMIC
	# pytest -sv tests/e2e/multicard/test_offline_inference_distributed.py::test_sp_for_qwen3_moe
	# pytest -sv tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_Qwen_Dense_with_flashcomm_v1
	# pytest -sv tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_Qwen_Dense_with_prefetch_mlp_weight

	# #pytest -sv tests/e2e/multicard/test_pipeline_parallel.py
	# pytest -sv tests/e2e/multicard/test_prefix_caching.py
	# pytest -sv tests/e2e/multicard/test_qwen3_moe.py
	# pytest -sv tests/e2e/multicard/test_torchair_graph_mode.py

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

fix eagle in Pr2917 #163

Workflow file

fix eagle in Pr2917 #163

Uh oh!

Jobs

Run details

Workflow file for this run