Version 1.8.2.0 - 2016-01-14 - Tweaks.

[zer0Kerbal]

Version 1.8.2 - 2016-01-14 - Tweaks.

• Consolidating tech tree for better mod compatibility:
  • Added SpaceY Expanded's tech tree nodes.
  • Added a hidden Colossal Rocketry node for future use - and for other mods if they want).
• Removed TweakScale "adapter_3_1" definition since it's redundant with default TS configs now.
• closes Version 1.8.2 #2

Version 1.8.1 - 2016-01-02 - Fixes.

• Included ModuleManager version updated with its 2.6.16 bugfix update.
• Added a "needs" condition for TweakScale patches.
• Fixed the FilterExtensions category icon path.

Version 1.8 - 2015-12-31 - Texture updates.

• Moved the "SpaceY Expanded" 7.5m tank texture into this pack.
  • Repainted default appearance for 5m tanks to use it.
  • Enables color-switching for 5m tanks even without "SpaceY Expanded".
  • 3.75m fueled short nose cone repainted with it too, removed grey stripes.
  • Reduced size of original 5m tank texture, removing redundant black/white areas.
  • Repainted 5m R7 engine to match, for compatibility.
• Removed a fairing texture that was no longer in use.

Version 1.7 - 2015-12-22 - More separator goodness.

• Added "SpaceY_ATM.cfg" with settings to attempt to disable or dissuade ActiveTextureManagement for this mod.
  • Can optionally be deleted to return to ATM defaults.
  • ATM known to occasionally have caching issues with remapped/shared textures in my mods.
  • SpaceY is already very memory efficient and uses DDS, so ATM doesn't help much for this case.
  • May need to delete ATM's cache if using ATM and some textures still aren't appearing.
• Updated 5m stack decoupler:
  • Ejection charge reduced by half (to 400, down from 800).
  • Added built-in "sepratron" solid propellant separator motors.
  • Research cost increased slightly.
• Added slanted variants of the sepratron nose cones.
• Reduced maximum temperature for docking ports. Should burn up more easily now. ;)
• Added a default custom part tab for VAB/SPH.

Version 1.6.1 - 2015-12-11 - Fix for nose cones.

• SRB sepratron nose cones rotated 90 degrees, so that they play nice with mirror symmetry mode.

Version 1.6 - 2015-12-11 - SRB Overhaul.

• Added additional paint schemes to the 1.875m/2.5m/3.75m SRBs,
  • Optional, requires Firespitter or InterstellarFuelSwitch core (DLL).
• Added sepratron nose-cones for SRBs.
• Fixed a typo with the engine heat animation for the K1 engines.
• Corrected a typo with Agency mentality.
• Replaced "placeholder" textures. Smaller, and more obvious when texture reassignment has failed.

Version 1.5 - 2015-11-11 - KSP 1.0.5 update.

• Kiwi engine adjusted: slightly improved ISP, decreased mass, increased thrust.
• Fuel crossfeed toggle added to decouplers.
• Launch clamps updated with new contract constraints.
• Ejectatrons updated to use new contract constraints, and exhaust damage reducer, and other thermal settings.
• Updated heat shield to current stock ablator settings and contract constraints. Slightly increased ablator quantity.
• Updated conical/petal bay to use current cargo bay thermal stats and allow door deployment limit.
• Adjusted inner attachment node on conical/petal bay to be offset inward like new stock settings on cargo bays.
• Updated all engines/SRBs to use FXModuleAnimateThrottle for heat animation.
• Updated all engines/SRBs to use new standard thermal settings, and new career contract constraints.
• "Automatic Switching" button hidden for cluster engines, since it did nothing.
• Adjusted fuel tank texture settings to reduce log warnings when SpaceY Expanded is not installed.
• Fairings, decouplers/separators, and more updated to use new stock-alike thermal settings and contract constraints.
• Launch Clamps updated with new contract constraints.

Version 1.4 - 2015-11-05 - More colors, balance.

• Added three new colors to 5m tanks (when color switching is available): Red, Blue, and Grey.
• Diameters added to 5m fuel tank names, for easy identification in VAB menu.
• Rebalanced the weight ratios of all SRBs, to correspond to KSP 1.0.X balance:
  • Increased dry mass (did not alter propellant amounts, ISPs, thrust values, etc).
  • Wet/Dry mass ratio is on sliding scale. Larger & more advanced SRBs have better mass ratios.
• Removed stripes from procedural fairings (will affect SpaceY Expanded as well).
• Slightly improved the texture rendering for the 5m fueled nose cone in the VAB menus.

Version 1.3.1 - 2015-10-18 - Bug fix.

• Fixed the ModuleManager conditionals to detect when the prerequisite mods are missing for fuel tank appearance switching.

Version 1.3 - 2015-10-16 - Engine and fuel tank Update.

• HotRockets adjustments:
  • Corrected some of the internal ID assignments (M/K engines).
  • Made corrections to particle scaling for all LFO engines.
  • Switched M,R series engines to use yellow flame instead of blue (RP1/kerosene inspired). Blue will be moved to the Penguins.
• LFO engines will now animate their heat glow based on throttle (like "Better Emissives" patch) instead of temperature.
  • I've been debating this one for a while. We'll try this out and see how it goes.
  • It's contained in patch called "SpaceY_HeatAnimation.cfg". Delete it or rename the "cfg" part to disable.
  • Patch will also apply to SpaceY-Expanded engines.
• New default custom flame/particle effects for all LFO (K,M,R series) engines.
• New engine bell art assets for the M,R series of LFO engines.
• Color switching added to 5m LFO tanks. To be enabled, requires Firespitter or InterstellarFuelSwitch, and SpaceY Expanded.

Version 1.2 - 2015-10-08 - Update.

• Added LC2 launch clamps to TweakScale config.
• Removed erroneous flagDecal module from LC2 launch clamps.
• Added bottom stack node and shroud to the R1 single Ratite engine.
• Added surface attachment to K1,M1,R1 engines.
  • Note: May cause some occasional goofiness with saved crafts in the VAB/SPH saved with the old versions. Best to remove, re-attach, and re-save.
• With InterstellarFuelSwitch or Firespitter, stack attachment bases can be toggled on K1,M1,R1 engines.
• Improved labeling on shrouds for K1,M1,R1 engines.

Version 1.1 - 2015-09-30 - Update.

• Increased connection breaking strength on many parts.
• Added second set of launch clamps, with long retraction range to reach around boosters.

Version 1.0.4 - 2015-09-23 - Tweaks.

• Fixed a double entry in the TweakScale config.
• Corrected an issue with some parts not showing up in CTT's tech tree.

Version 1.0.3 - 2015-09-02 - Tweaks.

• Increased joint breaking strength on 3.75m and 5m thrust plates.
• More file preparation to support the "SpaceY Expanded" dependency.
• Added spotlights to the docking ports.
• R1 ratite engine moved up to Very Heavy Rocketry tech node.

Version 1.0.2 - 2015-08-26 - Tweaks.

• Custom sounds disabled by default, until better ones can be located.
  • To re-enable, rename "SpaceY_CustomSounds.txt" back to "SpaceY_CustomSounds.cfg" (note the ".cfg" suffix).
• Added new "Massive Structure" tech node (when not using Community Tech Tree).
  • Moved all 5m structural/interstage adapters, docking port, and stack decouplers to this new node.
• Moved all 5m structural/interstage adapters, docking port, and stack decouplers to "Experimental Rocketry" in CTT.
• Cleaned up some of the Community Tech Tree configuration (organizing).
• Added the longest 3.75m SRB to the Gigantic Rocketry node in CTT, where it should have been.
• Added the longest 3.75m SRB to the Massive Rocketry node in non-CTT tech tree, where it should have been.

Version 1.0.1 - 2015-08-21 - Tweaks.

• Converted the 3.75m SRB textures to DDS format.
• Added missing manufacturer setting for 10R radial SRB.
• A few minor tweaks in preparation for the 7.5m spin-off pack (since this pack will be a dependency).
• Moved "README" and "CHANGELOG" to the mod's directory.
• Corrected a problem with multi-mode engine gimbal.
• R5 engine moved down to "Experimental Rocketry" node in Community Tech Tree.

Version 1.0 - 2015-08-05 - New things.

• Changed version numbering to 1.x to indicate we're no longer in rapid growth.
• Added a longer 5m (15m long) fuel tank.
• Added a set of 3.75m SRBs, stackable wih shrouds. (functional as lower/middle stages)
• Reworked the models/textures for the 2.5m SRBs.

Version 0.17.6 - 2015-07-26 - Tweaks.

• Reduced heat production in all liquid fuel engines to be more stock-alike.
• Slightly reduced heat production on 1.875m and 2.5m SRBs.
• Slightly altered names on M-series and R-series engines for clarity.

Version 0.17.5 - 2015-07-05 - Tweaks.

• Added ConductionFactor/convectionflux settings for petal bay.
• Adjusted OMS/RCS blocks' RCS thrust vectors to remove 5-degree offset (and thus minimize cosine losses).
• Moved custom engine sounds to separate "SpaceY_CustomSounds.cfg" ModuleManager file, for easy removal.

Version 0.17.4 - 2015-06-27 - M1 update, continued/hotfix

• Addressed a problem with new straight fairing in M1 Moa engine:
  • Removed middle attachment node that was added.
  • Replaced the 3.75m->5m cone fairing with the 2.5m straight fairing. (doubtful many people use that one anyway).
  • KNOWN ISSUE: If you used the new fairing in 0.17.3 (during the 12 hours or so it was available), the fairing will be invisible on ships already constructed.
  • requires KSP 1.0.4 to not be save-breaking

Version 0.17.3 - 2015-06-26 - M1 update.

• Added a middle-length, 2.5m "straight" cylindrical fairing to the M1 Moa engine. (requires KSP 1.0.4 to not be save-breaking)

Version 0.17.2 - 2015-06-22 - KSP 1.0.3 balance update.

• Updated thermal and ablator properties of heat shield, and removed transparency.
• Updated thermal settings on many parts, for stock balance, including nose cones, fairings, SRBs, Engines, etc.
• Fairing mass & thermal values updated.
• SRB ISPs rebalanced, to be equal to some of the better performing stock SRBs.
• Adjusted SRB propellant capacities and costs.

Version 0.17.1 - 2015-06-21 - SRB hotfix

• Corrected a problem with colliders on the new 21m long 1.875m SRB (should no longer fall through the pad).

Version 0.17 - 2015-06-18 - Thermal help, plus SRBs.

• Increased "thermal mass" multiplier and heat conductivity for thrust plates.
• Increased "thermal mass" multiplier for structural/conical size adapters.
• Increased heat tolerance for thrust plates and size adapters.
• Shortened SRB names to "SRB" instead of "Solid Rocket Booster" to save space in the UI.
• Added a new (21m) long 1.875m SRB.
• Added a new (9m) long 0.625m SRB.

Version 0.16.1 - 2015-06-09 - Hotfix

• Fixed R7 engine description.
• Converted R7 supplemental texture to DDS format.

Version 0.16 - 2015-06-09 - New engine, etc.

• Deleted an unused texture.
• Moved the large launch clamps later in the tech tree.
• Restored the R5 engine to 11,000 thrust (10% increase over the previous few versions).
• Added new R7 engine cluster with integrated fuel.
• Adjusted sound for R5 (and new R7) engines.

Version 0.15 - 2015-06-04 - Tweaks & fixes

• Updated Deadly Reentry config with more current data.
• Added support for Modular Fuel Systems (Modular Fuel Tanks).
• Small tweaks to conical payload bay; shielding should theoretically work better now.
• Closed a small gap in the colliders on the conical payload bay.
• Added VAB/SPH transparency to conical payload bay.

Version 0.14.1 - 2015-05-28 - Balance tweaks

• Increased cost, torque, and battery capacity in both probe cores.
• Improved ISP for most engines at extreme atmospheric pressures (Eve).
• Changed flag/agency images back to PNG format so they'll work again.

Version 0.14 - 2015-05-20 - Hot fix, finalizing as 0.14.

• New RCS block set to be physicsless.

Version 0.13.2 - 2015-05-20 - Fixes & Engine rebalancing against stock.

• Corrected the 3.75m fueled nose cone to appear in the size-3 bulkhead profile.
• Corrected the manufacturer setting on the 0.625m SRBs.
• LFO Engine balance pass. Note that a lowered Vacuum ISP results in improved sea-level thrust:
  • K1 engine: Lowered vacuum ISP.
  • M1 engine: Increased mass slightly, and lowered vacuum ISP.
  • M5 engine: Increased mass, and lowered vacuum ISP.
  • M9 engine: Lowered vacuum ISP.
  • R1 engine: Increased mass slightly, raised sea-level ISP, and lowered vacuum ISP.
  • R5 engine: Raised sea-level ISP, and lowered vacuum ISP.
• Added a 5-way RCS block (without integrated engine).
• Fixed a minor texture issue with the smaller "Dibamous" RCS/OMS engine block.
• Slightly increased RCS thrust on the smaller "Dibamous" RCS/OMS engine block.

Version 0.13.1 - 2015-05-14 - SRB adjustments, etc

• Corrected several TweakScale settings to allow scaling of various engines, plus fairings and heat shield.
• Small amount of gimbal added to 2.5m SRBs.
• Added an intermediate sized radial SRB.

Version 0.13 - 2015-05-09 - More heatshield goodness.

• Fixed a typo in the Community Tech Tree config.
• Corrected the bulkhead profile for the new mini radial SRB so it's not listed as a size-0 stack part.
• New texture for the procedural fairing panels.
• Adjusted the procedural fairing panels to begin at upper edge of base.
• Added large (5m) heat shield.

Version 0.12.3 - 2015-05-08 - 1.0.2 adjustments

• Tweaked the conical cargo bay's drag cube.
• Fixed a configuration typo for the 3.75m to 2.5m thrust plate.
• Reversed the attachment node priority order for extremely thin parts (docking ports, probe cores, thrust plates), so that they attach more easily.
• Updated "Community Tech Tree" support for compatibility with CTT's new design.
• Improved performance of monopropellant engines in atmospheric pressures > 1.
• Corrected the career-contract settings for the launch clamps so that they match stock.
• Added NASA engine sounds to SRBs and engine clusters.
• Added a pair of small scale (0.625m) SRBs.

Version 0.12.2 - 2015-05-01 - 1.0.1 adjustments

• Improved gimbal on liquid-fuel engines.
• Adjusted heat generation on all engines to correspond to KSP 1.0.1 changes.
• Adjusted all engine thrust numbers to correspond to KSP 1.0.1 changes.
• Added "drag box" settings for conical cargo bay.
• Converted textures to DDS format.

Version 0.12.1 - 2015-04-30 - More 1.0 adjustments

• Fixed the 5m engines to no longer cause continuous smoke on the pad.
• Tweaked the max-temps on the engines and fuel tanks. Now only 5-10% more heat tolerant than stock.
• Adjusted heat generation/dissipation values on SRBs to match stock KD25k SRB.
• Lowered ISPs of the liquid-fuel engines, due to stock rebalance.
• Tweaked some of the thrust numbers for the liquid-fuel engines.
• Tweaked ISP range of the monopropellant OMS/RCS engines to match stock.

Version 0.12 - 2015-04-29 - More tweaks, KSP 1.0 updates

• Slight correction to 1.875m SRBs exhaust positioning.
• KSP 1.0 compatibility pass (fixes to attachment nodes, heat scales, tech tree assignments, thrust/ISP scaling, etc)
• KSP 1.0 balance pass, and additional settings.
• Reassigned tech-tree locations.
• Removed static fairings.
• Added 1.0-like procedural 5m fairing.

Version 0.11 - 2015-02-18 - Beta, minor imrpovements

• Corrected several mistakes in the Community Tech Tree patch.
• Updated the HotRockets config to have different vacuum/atmo effects.
• Added some gimbal to the 1.875m SRBs (inspired by the Space Shuttle SRB gimbal).
• Slightly updated the texture on the 1.875m SRBs, plus other minor fixes.

Version 0.10 - 2015-02-06 - Aerodynamic and Structural Edition

• Added "command station" settings to the probe cores for Remote Tech.
• Added 5m and 3.75m inline fairings with optional size adapters + associated nose cones.
• Added 5m and 3.75m Stack Separators.
• Added taller 5m and 3.75m fueled nose cones, in the style of the fairing nose cones.
• Added Deadly-ReEntry settings for the existing and new nose cones.
• Significantly increased torque/breaking strength of nearly all SpaceY parts.

Version 0.9.1 - 2015-01-21 - The "rapid unplanned disassembly" mitigation edition.

• Discovered that a lot of the torque/breaking strength numbers were set at 3.75m values:
• Increased torque/breaking strength of all radial reaction wheels.
• Increased torque/breaking strength of conical size-adapters.
• Increased torque/breaking strength of all fuel tanks (which were set slightly lower than the 3.75m Kerbodyne tanks).
• Increased torque/breaking strength of all decouplers.
• Increased torque/breaking strength of all engines & SRBs, except the Kiwi/K1.
• Tweaked torque/breaking strength of docking ports.
• Tweaked torque/breaking strength of petal payload bay.

Version 0.9 - 2015-01-16 - Beta - WARNING - Extra node on Dibamous may be SAVE BREAKING.

• Added a stack attachment node to "Dibamous" RCS/OMS pod.
• Experimentally tweaked some strength settings on the docking ports. Let me know if this helps.
• Adjusted colors on inside ring of large probe cores, to differentiate them in the VAB menu.
• Several adjustments to the rigid landing-leg stack ring:
  • Adjusted size, positioning, rotation, and number of the legs.
  • Considerably improved strength / breaking force.
  • Switched to the actual landing-leg module to call the animation, so it responds to landing gear hotkey.
• Added "SpaceX" style individual landing legs.
• Added "Super Dibamous" combined RCS/OMS pod (larger variant of "Dibamous").
• All "thrust plate" parts have had their names adjusted, and color-coding added.
• Added support for Connected Living Space, for the probe cores and docking ports.

Version 0.8 - 2015-01-09 - Beta

• Added RemoteTech support for probe cores.
• Added Engine Ignitor support for launch clamps.
• Added auto-shroud to tops of cylindrical fuel tanks.
• Altered fuel tank paint scheme to be a little more glossy, and less "satin".

Version 0.7 - 2014-12-27 - Beta

• Removed the "ASAS" from the Radial Reaction Wheel texture, and slightly enhanced the gloss.
• Added multi-mode operation to M5 and R5 engines, allowing for center engine cut-off, like Saturn-V.
• Added 3.75m and 5m advanced probe cores ("Stack Guidance Systems")
• Added 5m landing-leg "ring". Warning: Must land lightly, probably 3m/s or slower. Fragility is a known issue.

Version 0.6.1 - 2014-12-23 - Beta

• Actually applied the thrust increase for the K1 Kiwi engine that belonged in the last update.
• Corrected a few typos in part titles and descriptions.

Version 0.6 - 2014-12-23 - Beta

• Removed SAS from Reaction Wheel parts, since it no longer works without being on a command pod/core.
• Updated the naming convention for all engines, SRBs, tanks, and size adapters to be clearer and more consistent.
• Added mode-switching for the M9 engine. Alternate mode engages only center engine, for landing.
• Corrected K1 "Kiwi" engine's manufacturer so that it shows up in the SpaceY tab.
• Increased thrust slightly on K1 "Kiwi" engine.
• Increased thrust of R-series "Ratite" engines by 10%.
• Increased thrust of M-series "Moa" engines by 33%.
• Increased gimbal range of all M-series engines to 3 degrees.
• Added RCS/OMS "Dibamus" monopropellant engine and maneuvering unit.
• Slightly slowed the spool-up rate for all engines, to reduce sudden dissassembly syndrome with Z and X keys

Version 0.5.1 - 2014-12-16 - Beta Release, 0.90 tweaks

• Added an even larger SRB, a 2.5m x 23m monstrosity. :)
• Fixed manufacturer icon in VAB/SPH manufacturer-sort.
• Reduced dry-mass of fuel tanks, to be more competitive with the new Mk3 LFO tanks.

Version 0.5 - 2014-12-15 - Beta Release

• No changes strictly necessary for 0.90:
  • Engine/FuelTank split is automatic, but we went ahead and updated to explicitly categorize anyway.
  • Leaving SAS basic capability on the reaction wheel parts for now.
• New naming scheme for engines, as a parody of SpaceX's naming. Flightless birds instead of raptors. :)
  • D1 engine renamed K1 "Kiwi"
  • F1/F5/F5 "Falcon" engines renamed M1/M5/M9 "Moa" engines.
  • R1/R5 "Raptor" engines renamed R1/R5 "Ratite" engines.
• Added Heavy-Duty Launch Clamp
• Added TweakScale support for the M1 engine that was missing.
• Added missing TweakScale "adapter 3-1" scale (which was fine if you also had Modular Rocket Systems installed)
• Added HotRockets support
• Repainted the ejection arrows on the radial decouplers to be blue.
• Made several changes to the K1 engine:
  • Moved earlier in tech tree, to Heavy Rocketry, alongside Skipper instead of Mainsail.
  • Repainted turbopumps to be blue
  • Added a cylindrical shroud, and stacking capability.
  • Improved ISP (mostly at the vacuum end).
  • Corrected the attachment node to be 1.25m size (instead of the default of 0.625m).
• Changed several stats of the 1-way thrust plates (shrouded size adapters):
  • Moved the 3.75m->2.5m and 2.5m->1.25m units earlier in the tech tree.
  • Reduced mass of the 3.75m->2.5m and 5m->3.75m units.
  • Slightly reduced costs of all three.
  • Added a fourth size: a shorter duplicate for the 2.5m->1.25m for use with smaller engines.
• Adjusted naming convention of parts and model-numbers to be more consistent, across the entire parts list.

Version 0.4 - 2014-12-10 - Beta updates

• Increased gimbal range of all engines, slightly.
• Decreased dry mass of all fuel tanks slightly (dry/fueled mass ratio is now between stock 3.75m and 2.5m tanks).
• Added "D1" 1.25m booster engine.
• Added upper-stage (with fairing) single-engine thrust-plates:
  • 5m to 3.75 adapter
  • 3.75m to 2.5 adapter
  • 2.5m to 1.25 adapter
• Added non-fueled size adapters with multiple target sizes each, with a shared texture (from the 5m to 3.75m adapter):
  • 5m to 3.75m/2.5m/1.25m adapter
  • 3.75m to 2.5m/1.25m adapter
• Added 3.75m to 2.5m conical "petal" payload bay, with functioning doors

Version 0.3 - 2014-12-03 - Beta updates

• Repainted 5m decoupler to match fuel tank stripes, and have blue triangles.
• Repainted 5m to 4x 2.5m adapter, to match fuel tank stripes.
• Repainted 5m to 3.75m fueled adapter tank, to match the other stripes (sensing a theme?)
  • Added external fuel pipes on 5m to 3.75m fueled adapter tank.
• Rotated engine bell pattern on F5 cluster engine, to match the R5 orientation.
• Raised center engine bell on F5 cluster, so that all five are mounted at the same height.
• Added 3.75m and 5m docking ports. (5m port is in "nanolathing" 1000-point tech-tree node)
• Added "thrust plates" with optional stacking as upper stage clusters with shrouds (with a shared texture):
  • Note: These are in the "nanolathing" 1000-point tech-tree node.
  • Added 3.75m to 5x 1.25m adapter
  • Added 3.75m to 7x 1.25m adapter
  • Added 5m to 8x 1.25 + 1x 2.5m adapter
  • Added 5m to 2x 2.5m adapter

Version 0.2.1 - 2014-11-25 - Quick Fix

• Fixed logo path for SpaceY agency config (for career mode)
• Changed "F1" engine to have conical size-adapting fairings instead of cylindrical.

Version 0.2 - 2014-11-25 - Beta update

• Added "Community Tech Tree" support. If CTT is installed:
  • Moves tall 2.5m SRB to "Gigantic Rocketry"
  • Moves R5 (SaturnV-like) engine to "Gigantic Rocketry"
• Changed sort-order in VAB/SPH menus for SRBs and short tank, so short versions are first.
  • (requires delete before reinstall of mod, or else you'll get double entries)
• Added "Ejectatron", equivalent to 10x Sepratron.
• Added intermediate height fuel tank.
• Added 5m & 3.75m external-ring ASAS reaction wheel systems.
• Added "R1" engine (single from the "R5" SaturnV-like cluster).
  • More thrust than Mainsail, and a little lighter, but much less efficient, costs more, and doesn't stack.
• Added "F1" engine (single from the "F5"/"F9" engines clusters).
  • Less efficient and pricier, but more powerful and lighter than the Skipper. Accepts stacking in 2.5m and 3.75m.
• Slightly improved "R5" engine cluster's efficiency.
• Reduced the price and research costs of all liquid fuel engines.
• Repainted fuel tanks, conical size adapters, and engines to be less "busy", and more SaturnV-like.
  • Slightly increased the "gloss" on tanks, so that the paint has more of a satin finish.
• Updated TweakScale settings and moved them to a file called "SpaceY-TweakScale.cfg" for easy deletion/modification.

Version 0.1 - 2014-11-17 - Initial Beta test version.

What's Changed

• Version 1.8.2 - 2016-01-14 - Tweaks. by @zer0Kerbal in Version 1.8.2 - 2016-01-14 - Tweaks. #30

New Contributors

• @zer0Kerbal made their first contribution in Version 1.8.2 - 2016-01-14 - Tweaks. #30

Full Changelog: https://github.com/zer0Kerbal/SpaceY-Lifters/commits/1.8.2.0

---

This discussion was created from the release Version 1.8.2.0 - 2016-01-14 - Tweaks..